need 2010 tacoma wiring for remote start

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123235
Printed Date: July 07, 2025 at 10:36 PM

Topic: need 2010 tacoma wiring for remote start

Posted By: ashleytingle
Subject: need 2010 tacoma wiring for remote start
Date Posted: August 24, 2010 at 3:39 PM

I posted this request earlier but I think I may have placed it in the wrong forum. I also need the factory immobilizer location

Replies:

Posted By: kreg357
Date Posted: August 24, 2010 at 6:39 PM

According to Bulldog Security, the 2009 and 2010 are the same. https://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp

I don't believe they are using 80 bit keys on the Tacoma yet. ( 80 bit key has a "G" stamped on the blade. ) A DEI PKALL should work. Here is a link to the PKALL info, check the Tacoma Install guide for connector location, etc. https://www.xpresskit.com/product.aspx?productid=196

-------------
Soldering is fun!

Posted By: ashleytingle
Date Posted: August 25, 2010 at 7:41 AM

Thanks so much!!! I was a master installer back in the early 90's. My how cars have changed!!! I used to could install a DEI rermote start blindfolded. Not so much anymore... Really glad I found this site

Posted By: kreg357
Date Posted: August 25, 2010 at 9:22 AM

Glad to assist. Anything else just ask, there are alot of knowledgeable people on this site.

Good luck!

-------------
Soldering is fun!

Print Page | Close Window