Print Page | Close Window

ford f 150 05 factory stereo

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123302
Printed Date: June 15, 2024 at 1:54 PM


Topic: ford f 150 05 factory stereo

Posted By: madrigal87
Subject: ford f 150 05 factory stereo
Date Posted: August 29, 2010 at 6:22 PM

How can i hook up my amp to my factory stereo. like the remote wire and rca cables on a Ford F-150 2005? Thanks

-------------
francisco madrigal



Replies:

Posted By: i am an idiot
Date Posted: August 29, 2010 at 7:03 PM

You will need a line out converter. Most people connect the remote wire to the accessory wire of the radio.  The amp will be on anytime the ignition switch is in the on or acc position.  If this is not acceptable for you, they do sell line out converters that will give you a remote output.




Posted By: elpadre
Date Posted: August 30, 2010 at 1:18 PM
If you allready got the converter best or easy way is just put to 1 speaker, 1st take radio out find those wires blue/white - and ORANGE / green + and put the remote wire to Light GREEN/ YELLOW wire it is the swich wire

-------------
Javier sierra



Posted By: i am an idiot
Date Posted: August 30, 2010 at 2:55 PM
You really need to connect the converter to both channels of your deck.  I know that there is not much difference between left and right low frequency information, but why would you want to have only left or right information getting to your sub.  It is a stereo system.  Stereo meaning 2 separate channels of information. 


Print Page | Close Window