2009/2010 dodge ram 1500 door locks

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123915
Printed Date: April 25, 2024 at 5:41 AM

Topic: 2009/2010 dodge ram 1500 door locks

Posted By: philofab
Subject: 2009/2010 dodge ram 1500 door locks
Date Posted: October 13, 2010 at 1:13 PM

I'm having issues with interfacing to door locks on a 2010 Dodge RAM 1500. Been probing everything in the driver door and had no luck. I attempting to setup a drivers priority system. Checked search and wiring info on several sites, nothing seems to match this truck.

Replies:

Posted By: kreg357
Date Posted: October 14, 2010 at 6:13 AM

All the info I found is for a straight all door lock / unlock using the resistor based one wire system at the passanger door:

POWER LOCK      PURPLE / LT.GREEN (- THRU 330 OHM RESISTOR)          SWITCH IN PASSENGER DOOR OR AT LOCK MODULE IN PASS DOOR
                                                                                                                                         PIN 4 ,BLUE 10PIN PLUG
POWER UNLOCK    ONE WIRE, SAME AS LOCK (-THRU 100 OHM RESISTOR)    IN PASSENGER DOOR

Priority UnLock is supported by the iDatalink bypass modules, like the ADS ALSL CH.

-------------
Soldering is fun!

Posted By: philofab
Date Posted: October 14, 2010 at 11:33 AM

I got it done yesterday after probing wires for hours. I used a relay in the driver KP for drivers priority unlock. 09+ trucks are way more difficult than the earlier ones. I need to start using modules instead of resistors, diodes, and relays.