2001 subaru impreza remote start
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124021
Printed Date: May 18, 2025 at 4:47 PM
Topic: 2001 subaru impreza remote start
Posted By: 161db
Subject: 2001 subaru impreza remote start
Date Posted: October 20, 2010 at 9:50 AM
manual transmission how to bypass clutch and parking brake? no idea thanks ------------- audio man
Replies:
Posted By: Velocity Motors
Date Posted: October 20, 2010 at 11:50 AM
On the clutch pedal there will most like be two connectors ( one for clutch engagement/cruise and other for starting. You will need to meter the wire and find the wire that follows the start sequence. You will need to engage the clutch to see what type clutch bypass the Subaru requires as well.
As far as the parking brake goes, you will most likely find it at the park brake switch under the park brake handle.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: howie ll
Date Posted: October 20, 2010 at 5:15 PM
Parking brake can also be picked up, along with tach at rear of instrument panel, with that bloody complicated mess under the hood it's far easier.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: October 20, 2010 at 5:19 PM
There should also be an NSS feed at one of the engine management pins so no need to worry about manual transmission reservation.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: October 20, 2010 at 5:28 PM
Marked neutral position switch, probably pin 16.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: October 20, 2010 at 5:29 PM
Sorry, it will go to ground when ignition is on and car is in neutral.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|