Print Page | Close Window

2011 nissan armada

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124903
Printed Date: May 12, 2025 at 5:28 AM


Topic: 2011 nissan armada

Posted By: previc95
Subject: 2011 nissan armada
Date Posted: December 08, 2010 at 1:18 PM

I am doing a remote start in a 2011 Nissan Armada and need the wiring diagram. Can you help me out?



Replies:

Posted By: agent26
Date Posted: March 23, 2011 at 1:17 PM
Won't be long and I'll be in the same boat. 2011 Armada 2wd, SV. This is the non-pushbutton start model.




Posted By: slonoma
Date Posted: March 27, 2011 at 2:19 PM
This might help with the wiring.
If you use one of these you don't need and extra key either and no need for extra remote on your key chain.
https://idatalink.com/search/index/model/7639




Posted By: agent26
Date Posted: March 28, 2011 at 10:55 AM
I noticed that site doesn't have anything for the non-intelikey model. So, I'll just hang back for the wire colors.




Posted By: slonoma
Date Posted: March 28, 2011 at 9:35 PM
I was referring to their install guide it gives you pin outs and wire colors generally their the same. I work on Infiniti so their all push botton.




Posted By: flobee4
Date Posted: March 28, 2011 at 10:14 PM
Same as the 2010, I confirmed with Directech wire for wire and location for location. Here is a link with the colors, Make sure to test your wires.


Link

Frank




Posted By: flobee4
Date Posted: March 28, 2011 at 10:20 PM
By the way you don't have to run into the door for locks, you can use the "empty pin" trick. Insert a wire into empty Pins 13(lock) and 14(unlock) @ the BCM's 40 pin plug. Same Plug as your Can wires and security LED wires if you are using a data bypass for the immobilizer. Double Pulse to unlock.




Posted By: agent26
Date Posted: March 29, 2011 at 9:43 PM
Thank you gentlemen for your replies and info. Maybe I'll be able to knock the rust off my soldering iron this weekend. posted_image




Posted By: basicmarkct
Date Posted: September 03, 2011 at 12:54 AM
Can also get parking lights and brake at the trailer plug taped up next to the BCM on the right side of the wheel. Red is +parking lights and light green is brake

-------------
09 nissan maxima




Posted By: basicmarkct
Date Posted: September 03, 2011 at 12:56 AM
Also can do locks and windows at the master switch in the drivers door. If the truck is a smart key there is a key take over for it. only problem is your gonna have to take out the cluster to get to the plug

-------------
09 nissan maxima





Print Page | Close Window