viper 5701 on nissan frontier 08

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125277
Printed Date: July 06, 2025 at 1:16 PM

Topic: viper 5701 on nissan frontier 08

Posted By: joelr7309
Subject: viper 5701 on nissan frontier 08
Date Posted: December 27, 2010 at 2:49 PM

I haven't been back on this website since I google my users name and it showed up... I did a Viper 550 ESP back in 2002 on my Acura Integra remote start manual 5speed and was successful from the help of the folks in here which was my first alarm. Thanks again
Easy but time consuming

I bought a 2008 Nissan Truck which is also a stick and I'm trying to install a Viper 5701 alarm on the truck. Here are my questions

1. Do I need a bypass or immobilzer for this truck which my truck is the lowest class just the key. I'm not sure if this key has a chip or dio what ever you call it

2. anyone have the wiring diagram for my truck, I only found the exterra wire diagram hoping its the same... MANY THANKS

Replies:

Posted By: kreg357
Date Posted: December 27, 2010 at 4:27 PM

Here is a link to Bulldog Security for wiring info : https://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp

Here is a link to AudioVox for their wiring info : https://techservices.audiovox.com/login.aspx Sign-up is free.

The 2008 Frontier should have a transponder immobilizer system. There are many good bypass' available for this vehicle.

-------------
Soldering is fun!

Posted By: joelr7309
Date Posted: December 27, 2010 at 10:52 PM

Thanks brotha, I see some of the wire. I keep this posted when I finish my project

Posted By: joelr7309
Date Posted: December 28, 2010 at 1:33 PM

Need help putting power door locks..

My truck came bone stock didnt come with power door locks so i bought 2 door accuators and tried this diagram to install
posted_image

my 5 pin relays smoke like crap as soon as i put the 12vlt positive live..
I guess this diagram wasn't correct.
anyone have any other diagram to try

Posted By: kreg357
Date Posted: December 28, 2010 at 3:07 PM

Here is a diagram from AudioVox : https://documents.audiovox.com/701139.pdf

-------------
Soldering is fun!

Posted By: joelr7309
Date Posted: December 28, 2010 at 3:19 PM

Kool man thansk again. hope this works..
Wondering does it matter what type of 5 pin relay to use. I'm using a 12vlt 30 amp relay I got from the autozone

Posted By: kreg357
Date Posted: December 28, 2010 at 5:20 PM

The basic Bosch 30/40A SPDT automotive relay is fine.

-------------
Soldering is fun!

Posted By: joelr7309
Date Posted: December 31, 2010 at 3:27 AM

Thanks for the relay help. The thing was driving me crazy, So I just bought the DEI 451M lock mod.
I hooked up the follow to my Viper 5701

RED / GREEN/ blue. I had to cut because it had no socket to fit in the alarm so I spliced it to the following connections

red-Constant 12 Volt
Green- to alarm green
Blue- to alarm blue

White
Brown- both ground
Purple- 12 Constant
Blue- Blue Actuators
Green- Green Actuators

I want to put a toggle switch, do I jumper
green and blue from the alarm wires or Actuator wires?
I'm thinking the alarm wires

I was right I it was the alarm side..Nevermind