2011 camry se 2.5 viper 5701

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126393
Printed Date: May 01, 2025 at 6:46 PM

Topic: 2011 camry se 2.5 viper 5701

Posted By: matt7995
Subject: 2011 camry se 2.5 viper 5701
Date Posted: March 02, 2011 at 6:51 AM

Going to try to install this in my new camry. can't seem to locate any thing about the wiring diagram. any help would be great.

Replies:

Posted By: matt7995
Date Posted: March 02, 2011 at 5:15 PM

well after attempting to wire the unit.

the car starter wont work. hit the starter button and the Control clicks about 4 times and nothing happens. so back to the books to try and find a vehicle schematic and or a install guide for a 2011 toyota camry Se 2.5l.

im using the 5701 and the DBALL module so that no key will be needed. all seems to be wired right, chances of a bad 5701 module?
also the DBALL lights at first where lighting up fine. after trying to set it up with the d2d link from the 5701 to the dball the lights flashed green then red. repeatedly and after trying to start it with the remote again. no lights were flashing. anyone have any idea where to go from there?

Posted By: vtine12
Date Posted: November 23, 2011 at 12:41 AM

You need to use both starter wires Blue(+) and Gray(+) at the ignition switch!!! I installed a Avital 5303L (with securtiy alarm) and had to cut both wires, connected both wires from the ignition side together then connected both wires from the starter side together. Then connected them to the remote starter. Head scratcher for a few hours before I figure it out. :-)