Print Page | Close Window

alarm wiring 2011 toyota prius

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127558
Printed Date: May 15, 2025 at 11:50 AM


Topic: alarm wiring 2011 toyota prius

Posted By: KPierson
Subject: alarm wiring 2011 toyota prius
Date Posted: June 06, 2011 at 6:17 AM

I'm looking for wiring information for a 2011 Toyota Prius. My main concerns are for keyless entry (lock, unlock, arm, disarm) but I'll take all I can get!

Thank you,

-------------
Kevin Pierson



Replies:

Posted By: howie ll
Date Posted: June 06, 2011 at 8:49 AM
Kevin I just placed it into the downloads/manuals section.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.




Posted By: KPierson
Date Posted: June 06, 2011 at 9:07 AM
Just the information I needed - Thanks Howie!

-------------
Kevin Pierson




Posted By: howie ll
Date Posted: June 06, 2011 at 9:43 AM
It looks very fiddly, not difficult just lots of detail.
I installed an old-school Nokia (next year it will be do you remember Nokia) Cark-91 kit into a 2007 last week, first ever Prius (I've avoided them before). It came about very easily but I will make one point that you might already be aware of with reference to Toyotas generally, lay out everything on a bench on bubble wrap or in the trunk, those trims are SO EASILY scratched!

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.




Posted By: KPierson
Date Posted: June 06, 2011 at 10:55 AM
Thanks for the heads up. I'm actually not going to be working on this car, the request was for a customer (and fellow member of this site). He is having issues finding some wires for something I made him (from the passive lock thread from a few weeks back). I will pass this advice on to him!

-------------
Kevin Pierson





Print Page | Close Window