toyota tacoma 2008
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128527
Printed Date: May 01, 2024 at 11:47 PM
Topic: toyota tacoma 2008
Posted By: beam08
Subject: toyota tacoma 2008
Date Posted: September 14, 2011 at 7:32 PM
Hi can i have wiring guild for toyota tacoma 2008 and how do i test the door pinswitch or can i hook up to the domelight?
Thanks
Replies:
Posted By: clarence1996
Date Posted: September 14, 2011 at 10:16 PM
Individual Door Pins DF-GREEN/ YELLOW 18 Pin Conn Front Of Driver Fuse PF-RED / BLACK 11Pin GREY Conn Passenger Kick, PINK/BLACK 18 Pin Conn Driver Fuse Covers Both Rear Doors. Diode Isolate With Cathode (Stripe) To OEM Wires
-------------
TheWire1
Posted By: howie ll
Date Posted: September 15, 2011 at 8:26 AM
Use the dome light, it's more simple, usually a three pin white plug on the fuse box for most Toyotas after 2000, it has a delay but shuts down as soon as the door is locked.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: beam08
Date Posted: September 20, 2011 at 6:58 PM
Thanks for helping ,I have Tonneau cover for the back trunk for toyota tacoma 2008 and what kind switch i has to use.
|