’06 honda element 7 speaker xm ready
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128639
Printed Date: May 12, 2025 at 9:17 PM
Topic: ’06 honda element 7 speaker xm ready
Posted By: toowired
Subject: ’06 honda element 7 speaker xm ready
Date Posted: September 26, 2011 at 11:22 PM
Wondering if anyone would have a diagram for this stereo system, it is a 4 speaker, 2 tweet, and a factory sub system. What I am actually looking for is where to find the sub output wires, and whether they are able to be used as a pre-out, as to supply signal to an aftermarket amp, and whether, or not the factory head unit puts out enough to make it useable.
Replies:
Posted By: howie ll
Date Posted: September 27, 2011 at 7:31 AM
Look at the Metra web site, vehicle fit guide, ready made adaptor looms.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: i am an idiot
Date Posted: September 27, 2011 at 8:10 PM
Most OEM head units do ot put out enough voltage to properly drive an aftermarket amplifier. Pac-Audio.com manufactures a Line output converter that is designed to do exactly what you are trying to do. Look at the SNi-35
Posted By: i am an idiot
Date Posted: September 27, 2011 at 8:12 PM
|
|
| Part Number: |
SNI-35 |
| Category: |
Audio Interfacing |
| Description: |
Adjustable Line Output Converter |
| |
|
