2008 pontiac g6 viper 5601 remote start

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128646
Printed Date: May 13, 2025 at 6:19 AM

Topic: 2008 pontiac g6 viper 5601 remote start

Posted By: 11357923
Subject: 2008 pontiac g6 viper 5601 remote start
Date Posted: September 27, 2011 at 7:44 PM

Can some one help me. This car apparently has no starter wire so where do i connect the the remote start starter wire?
Thanks in advance any help is appreciated

Replies:

Posted By: kreg357
Date Posted: September 28, 2011 at 9:51 PM

No connection needed on the Viper Starter Output wire. Car starts when it sees Ignition & Accessory go to +12v and then Accessory drop to 0v. You will need a bypass module for the Passlock2. A module like the DEI DLPK will handle that plus the locks, alarms, trunk, MUX, etc. Here is a link : https://www.xpresskit.com/product.aspx?productid=122

-------------
Soldering is fun!

Print Page | Close Window