viper 5101 in a 2002 jeep liberty
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=129427
Printed Date: July 19, 2025 at 3:19 AM
Topic: viper 5101 in a 2002 jeep liberty
Posted By: fregin120
Subject: viper 5101 in a 2002 jeep liberty
Date Posted: November 28, 2011 at 1:56 PM
Hi I'm looking for some big help I have an extra credit project in auto class in high school it has to be done in 3 weeks if anyone can help me I'm putting a remote starter in a 2002 jeep liberty one with a gray chip key all we git to do this were the parts and wire so if any one could give me and my team a step by step instructions on how to in stall this viper 5101 remotestart with keyless entery it would great or even give us something to get this in and working. Iv tried calling dealers but there not willing to let us come in and job shadow or even help so if your nice and would be willing to help
We thank you in advance
-------------
ford is the best
Replies:
Posted By: performance713
Date Posted: November 28, 2011 at 3:53 PM
do yo have the alarm installation manual?, i can provide you with the car's wire diagram and key diagram from direchtechs if that helps.
-------------
im ( J ) and car audio is my thang.. and if i can help i will.
Posted By: fregin120
Date Posted: November 28, 2011 at 4:15 PM
All we got was the paper that tells us what the wires mean
-------------
ford is the best
Posted By: performance713
Date Posted: November 28, 2011 at 4:22 PM
ok, yeah,thats it, give me your email ill send you the diagram, and if you have any questions after that you let me know.
-------------
im ( J ) and car audio is my thang.. and if i can help i will.
Posted By: fregin120
Date Posted: November 28, 2011 at 4:44 PM
Fregin120@gmail.com
-------------
ford is the best
Posted By: smokeman1
Date Posted: November 28, 2011 at 4:47 PM
The install manual for the 5101 is listed in the downloads section of this site.
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: fregin120
Date Posted: November 28, 2011 at 5:27 PM
We saw that but it don't help thanks
-------------
ford is the best
Posted By: performance713
Date Posted: November 28, 2011 at 5:44 PM
just send it,, hope it helps...
-------------
im ( J ) and car audio is my thang.. and if i can help i will.
Posted By: fregin120
Date Posted: November 28, 2011 at 7:52 PM
I got it but it says the file is dammage
-------------
ford is the best
Posted By: performance713
Date Posted: November 29, 2011 at 11:29 AM
ok i just resend it,, try if it works, if it dont try this link and look for the year and model of the vehicle.
https://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp
-------------
im ( J ) and car audio is my thang.. and if i can help i will.
Posted By: fregin120
Date Posted: November 29, 2011 at 2:58 PM
Thanks ill try it and let u know
-------------
ford is the best
Posted By: fregin120
Date Posted: November 30, 2011 at 7:16 AM
So we got some of the wires hooked up last night after school now we came in to a problem I think on are 8 pin connector there is a starter out put and a fused starter input what do we do thou them do we cut the starter wire and soder the starter out put going to the motor and soder the starter input going to the ing? And there is 4 ignition wires ING 1 imput/output pink. ING. 2 RED / white 30a fused flex relay input 87
ING 1 red input fused 30a ING 2 pink/white flex relay output. Where do all these go if there is just 1 ING wire and for now just one more? What do we do about residor how do you put them in for the door locks. Thanks again
-------------
ford is the best
Posted By: performance713
Date Posted: November 30, 2011 at 11:03 AM
ok, im going to tell you were you need to hook them up,
1st. RED / white wire is not used
2nd. pink wire goes to RED / blue IGN1 in vehicle
3rd. pink/black not used
4th. pink/white goes to BLACK/ white 2nd accessory in vehicle (make sure you programmed this wire, it requires programming for second accessory.)
5th. orange wire goes to BLACK/ orange 1st accessory in vehicle
6th. RED / black wire goes to red(+) power on vehicle
7th. violet goes to yellow starter on vehicle(no need to cut, unless kill switch being installed in vehicle.)
8th. red wire goes to red(+) power on vehicle.
That should complete your 8 pin connector, hope this helps if any more questions let me know. You can also look at pages 24 and 25 from your installation manual, that should help you.
-------------
im ( J ) and car audio is my thang.. and if i can help i will.
|