2006 ford f150 remote start/security
Printed From: the12volt.comForum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130265
Printed Date: April 28, 2024 at 8:19 AM
Topic: 2006 ford f150 remote start/security
Posted By: jd_21
Subject: 2006 ford f150 remote start/security
Date Posted: January 17, 2012 at 5:07 PM
Hi there, I just recently installed a viper 5704 (it replaces the viper 5901) and just had a couple snags with the install. First I will start with the rear defogger. I know what wire color i need but I am a bit lost on where exactly I am going to find this wire. It is an orange / YELLOW wire. I looked behind the heater control panel in the wiring harnesses and didn't see it there. If someone could give me a hand in locating this wire that would be great.
Next is the door triggers. From what understand my wiring information is telling me that I have to go directly to the Body Security Module that is mounted on the rear cabin wall behind the rear seat and splice in to each wire for each door and use diodes to isolate each door wire from back feeding. I was just wondering if there is any easier way to hook up my door trigger wire?
If this helps my truck is a 2006 Ford F-150 FX4. Everything else on the remote start/security system works except my rear defogger and my door triggers, and this system is absolutely amazing. I love it! It advertises a 1 mile range and it actually does work that far, I have tested this many times in multiple different vehicles I have installed this same model remote start/security system. I highly recommend this system to anyone that wants an excellent remote start/security system combo.
So if anyone can please give me some clues on how to do these 2 things I asked it would be very much appreciated. Thanks a lot.
Next is the door triggers. From what understand my wiring information is telling me that I have to go directly to the Body Security Module that is mounted on the rear cabin wall behind the rear seat and splice in to each wire for each door and use diodes to isolate each door wire from back feeding. I was just wondering if there is any easier way to hook up my door trigger wire?
If this helps my truck is a 2006 Ford F-150 FX4. Everything else on the remote start/security system works except my rear defogger and my door triggers, and this system is absolutely amazing. I love it! It advertises a 1 mile range and it actually does work that far, I have tested this many times in multiple different vehicles I have installed this same model remote start/security system. I highly recommend this system to anyone that wants an excellent remote start/security system combo.
So if anyone can please give me some clues on how to do these 2 things I asked it would be very much appreciated. Thanks a lot.
Replies:
Posted By: el ranchero
Date Posted: January 17, 2012 at 9:00 PM
Posted By: jd_21
Date Posted: January 19, 2012 at 9:20 AM