2011 mitsubishi asx outlander sport/rvr

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130630
Printed Date: May 04, 2025 at 11:11 PM

Topic: 2011 mitsubishi asx outlander sport/rvr

Posted By: rob_quads
Subject: 2011 mitsubishi asx outlander sport/rvr
Date Posted: February 16, 2012 at 3:37 AM

I'm trying to fit an Clifford 1.3X (Viper 5301) to my Mitsubishi ASX (Euro version of the Outlander Sport). I think I have all the connections sussed except for the Tach reading.

I have seen one comment saying just to take a reading off an injector, another post mentioned that this can be picked up in the BCM module in the car.

Any ideas where to pick up the tach reading?

All the other connections are detailed in a google dos for now - Mitsubishi ASX - Clifford 1.3X / DB-ALL Wiring

Replies:

Posted By: howie ll
Date Posted: February 16, 2012 at 9:26 AM

Rear of instrument panel, engine ECU, non-common coloured wire at each injector, coil packs.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: ropuma
Date Posted: February 17, 2012 at 2:43 PM

Tach. green-white injector#1, Or ecm next of air cleaner.

Print Page | Close Window