toyota tacoma 2008

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130736
Printed Date: May 03, 2025 at 4:43 AM

Topic: toyota tacoma 2008

Posted By: beam08
Subject: toyota tacoma 2008
Date Posted: February 25, 2012 at 7:21 PM

I just bought the DEI 8601 Magnet Switch and one of the switch has 3 screw

How do you know which scew you hook up to Can AnyOne Help Me Please

Thanks

Replies:

Posted By: beam08
Date Posted: March 01, 2012 at 7:29 PM

So no one can help me or what i has pick up truck with campershell thats why i use this magnetic for the campershell

but i dont know which screw to use it.

Thanks

Posted By: 91stt
Date Posted: March 04, 2012 at 11:31 PM

The 3 screws should be labeled COM, NC and NO.
COM is the common to both NC and NO
NC is the normally closed contact
NO is the normally opened contact
Depending on what you want to do; will determine what terminals to use

-------------
This information is provided only as a reference.
All circuits should be verified with a digital multi-meter prior to making any connections.

Posted By: beam08
Date Posted: March 05, 2012 at 6:59 PM

Hi can you tell me which scew i has to use,this is for my campershell when people open the back window,the alarm should when off

thats why i dont know which screw so can you help me which screw i has to use.

Thanks

Posted By: 91stt
Date Posted: March 05, 2012 at 9:59 PM

It is best to let us know what system you plan to use with this switch. It will help us determine the proper configuration you will need.
Most system will be either negative or positive trigger.
If you plan on using it for a negative trigger, connect the NC to ground and COM to the alarm.
If you are using it with a positive trigger, NC goes to +12v constant through a fuse and COM to the alarm positive trigger.
I highly doubt the system will support it but the switch can be configured for closed loop operation too. I elaborate further if you really need it.

-------------
This information is provided only as a reference.
All circuits should be verified with a digital multi-meter prior to making any connections.

Posted By: beam08
Date Posted: March 06, 2012 at 4:45 PM

Hi i has clifford 50.7X i got everything hook up accept the campershell ,so can i use this switch for my campershell i mean for the back window.

Thanks for Helping me.

Posted By: beam08
Date Posted: March 08, 2012 at 7:23 PM

Thanks alots is working