I noticed there was a 2009 mitsubishi lancer, but is the wiring the same for the alarm system/remote start?
Bulldog Security shows the 2008 - 2011 as the same. Here is a link :
https://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp
Here is a link to the DEI wiring guide info : https://www.readyremote.com/main.asp?make=Mitsubishi&model=Lancer
-------------
Soldering is fun!
howie ll wrote:
Isn't there something on this or similar in the pictorial section?
I looked and was unable to find anything directly relating the 08 model vs the other models. Some vehicles are specific to years, and while a general consensus is that certain years are interchangeable, I wanted to be 100% positive.
On that note, does/has anyone have any information correlating to the fast key system and installing an alarm with it? I've attempted to locate it in the forums here, and have been unsuccessful using the search feature. I've also used google to search, and all that really comes up is that you have to use your viper alarm to disable it, then the fast key system to start it.
Any info for the fast key system and installing an alarm would be extremely helpful!
Looks like 2008 -2011 are the same or very similar. Here is a link to the EVO-ALL install guide for your vehicle : https://ifar.ca/download/3503/preview.html It should make the install pretty easy.
Here is a link to the 2011 Lancer pictorial Howard mentioned.: https://www.the12volt.com/installbay/forum_posts.asp~TID~130264~PN~1 Don't think it was a FastKey but it should help.
-------------
Soldering is fun!
Kregg, that Fortin sheet makes it look extremely easy.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.