2006 ford mustang
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131460
Printed Date: May 02, 2024 at 5:35 PM
Topic: 2006 ford mustang
Posted By: merks18
Subject: 2006 ford mustang
Date Posted: May 22, 2012 at 3:48 AM
Having trouble finding the remote turn on for this car. I've looked allover the net regarding the shaker systems, but the way described doesn't fit my scenario. I have only (2) plugs, main harness with all of the speaker, power, etc connections, and a secondary 8 pin connector with two wires. Wires I have unused RED / black, WHITE/ orange, and pink / YELLOW i believe. Can anyone help me out?
Replies:
Posted By: i am an idiot
Date Posted: May 22, 2012 at 8:56 AM
Are you trying to turn the factory amp on? Or are you trying to turn on an aftermarket amplifier?
Posted By: merks18
Date Posted: May 22, 2012 at 9:31 PM
Factory amp. And the second plug is a 16 pin plug. Pink/orange, yellow/red or white red
Posted By: i am an idiot
Date Posted: May 22, 2012 at 9:44 PM
Posted By: merks18
Date Posted: May 23, 2012 at 8:57 AM
Sure did, but the plug does not match. I believe the one with the kit is an 8-pin, the car has a 16 pin plug.
Posted By: i am an idiot
Date Posted: May 23, 2012 at 6:09 PM
I am pretty sure that the amp turn on wire is on the smaller plug. Did you buy that exact harness? 70-5521
Posted By: 91stt
Date Posted: May 23, 2012 at 10:20 PM
Seem to be an odd set up.
https://www.the12volt.com/installbay/file.asp?ID=1124
From the diagrams, it looks like the dark GREEN/ violet and gray/black wires in the 8 pin plug are the turn on wires. They are labeled as audio enable. Not sure what polarity they are though, you will need to check. It may be data, so use caution when testing.
-------------
This information is provided only as a reference.
All circuits should be verified with a digital multi-meter prior to making any connections.
Posted By: beatnbronco
Date Posted: June 29, 2012 at 11:45 PM
i've got this problem too..installed alpine HU and see 2 pairs of harnesses!! I didn't get an aftermarket harness, cut spliced into the wires for power and speakers. i hear sound through the rear mach 460 speakers but they don't sound amplified at all
|