I'm having problems finding the correct lock/unlock wires, and the brake wire. According to the schematic I have these wires do not match up. Also at the brake switch I can't get any one of the 4 wires to test positive when the brake is applied. I have checked this with the key on too. If anyone could help out in any way it would be greatly appreciated......thanks....
-------------
@lw@yz$uited
Look in the loom coming from the driver's door at the driver kick panel, WHITE/ black lock and RED / blue unlock. Both NEG (-) extend the lock time pulse for windows and possibly roof.
Brake wiring on this model is BLACK/ blue on one side (front to rear carpet edge loom) and black blue the other side.
Trunk trigger is WHITE/ brown (-) and trunk release is grey/light green (+ 5 amps) both in right hand side floor loom.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Update, the BROWN / grey at the 4 pin junction at the brake switch is the brake wire when ignition is on, I was thinking of the European version.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.