2012 honda accord door locks

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131994
Printed Date: June 08, 2024 at 10:30 AM

Topic: 2012 honda accord door locks

Posted By: ricardoboston
Subject: 2012 honda accord door locks
Date Posted: August 11, 2012 at 7:19 PM

hello everyone i need please some help to figure out door locks on this car ,if i need to hook up both wires unlock and detection wires from door lock to make it work right also any advice for this car thanks

Replies:

Posted By: i am an idiot
Date Posted: August 11, 2012 at 8:13 PM

Double Pulse to unlock all doors.

Power Unlock BROWN & WHITE (-) INSIDE DRIVERS DOOR AT KEY CYLINDER HARNESS OR AT MASTER POWER WINDOW SWITCH
PowerLock ORANGE (-) INSIDE DRIVERS DOOR AT KEY CYLINDER HARNESS OR AT MASTER POWER WINDOW SWITCH

Posted By: ricardoboston
Date Posted: August 12, 2012 at 2:41 PM

hi sorry for ask it but in order to have it connected , it need to have both wires brown and white connected to de unlock wire from the remote start blue wire, or do i have to use diode ? thanks

Posted By: kreg357
Date Posted: August 12, 2012 at 3:33 PM

Diodes required to keep the two vehicle wires isolated. Here is note from Bulldog Security

NOTE #4: the BROWN (-) is the DOOR Key Cylinder UNLOCK wire and WHITE(-) is the DOOR
UNLOCK Detection wire. Use BOTH wires and Diode Isolate.

-------------
Soldering is fun!

Posted By: ricardoboston
Date Posted: August 12, 2012 at 3:57 PM

thanks guys ,i will try it

Print Page | Close Window