2009 Mitsubishi L200 Raging Bull Wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132023
Printed Date: July 19, 2025 at 8:09 PM
Topic: 2009 Mitsubishi L200 Raging Bull Wiring
Posted By: is200_turbo
Subject: 2009 Mitsubishi L200 Raging Bull Wiring
Date Posted: August 17, 2012 at 2:29 PM
Hi looking for any wiring information that might be available for a 2009 Mitsubishi L200 Raging Bull.
In specific
Alarm & remote Start
factory alarm Outputs
Factory alarm points to activate external units + or - Trigger for GSM Module
Replies:
Posted By: is200_turbo
Date Posted: October 10, 2012 at 12:52 PM
Does this mean no one here has worked on the Mitsubishi l200 truck ?
Posted By: is200_turbo
Date Posted: October 20, 2012 at 7:16 AM
Ok so going through a technical manual this is the wiring i have identified can any of the guys on here confirm these are correct ?
Indicator Flash 1 - GREEN/ YELLOW (Cluster Loom)
Indicator Flash 2 - Green Orange (Cluster Loom)
rpm input - pin9 obd connector
door triggers - BLACK/ Red & BROWN / Yellow
Interior Light cable RED / Black
Door Lock - Blue/Black
Door Unlock - Blue/Red
Wait to start Lamp - BLACK/ white (cluster Loom)
Handbrake wire - Yellow (cluster Loom)
Brake wire - Orange (brake pedal)
The immobilisation wires and constant 12v can be identified at the ignition loom with my multimeter but providing all the above is correct for my model Mitsubishi L200 Raging bull
Posted By: popobich
Date Posted: October 15, 2013 at 12:56 PM
Hi,
Could you do the alarm? I'm working on a 2012 L200 and would like to know how did you do with the factory central locking system, I'm trying to figure it out but haven't been able to find the lock/unlock wires in the car.
Any help would be appreaciated.
Thank you
|