2012 toyota 4runner g key
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132386
Printed Date: May 11, 2025 at 9:48 AM
Topic: 2012 toyota 4runner g key
Posted By: chek
Subject: 2012 toyota 4runner g key
Date Posted: October 14, 2012 at 10:17 PM
Anyone have remote start/ alarm wiring info yet?
Replies:
Posted By: shortcircuit161
Date Posted: October 14, 2012 at 10:39 PM
You will need a data bypass module such as the idatalink ADS-AL CA or Fortin EVO-ALL
12volts green (30A) + ignition switch, white 8 pin plug, pin 7
Notes: If equipped, the Satellite Radio Tuner is under the front passenger seat.
Starter red + ignition switch, white 8 pin plug, pin 8
Second Starter black + ignition switch, white 8 pin plug, pin 1
Ignition black + ignition switch, white 8 pin plug, pin 6
Second Ignition purple + ignition switch, white 8 pin plug, pin 4
Third Ignition N/A
Accessory red + ignition switch, white 8 pin plug, pin 3
Second Accessory N/A
Keysense black - Body ECU, white 30 pin plug, pin 17
Notes: The Body ECU is under the driver dash, attached to the right side of the dash fuse box.
Power Lock black (passenger door switch) - Body ECU, white 30 pin plug, pin 9
Notes: The Body ECU is under the driver dash, attached to the right side of the dash fuse box.
This wire is only needed if the door locks do not function with the aftermarket system while the vehicle is running. All other times just use the factory alarm arm wire.
Power Unlock white (passenger door switch) - Body ECU, white 30 pin plug, pin 10
Notes: The Body ECU is under the driver dash, attached to the right side of the dash fuse box.
This wire is only needed if the door locks do not function with the aftermarket system while the vehicle is running. All other times just use the factory alarm disarm wire.
Lock Motor blue 5 wire dash fuse box, white 36 pin plug (2F), pin 8
Unlock Motor white 5 wire driver kick, white 20 pin plug, pin 1
Parking Lights+ green + dash fuse box, white 36 pin plug (2F), pin 16
Parking Lights- red - Body ECU, white 30 pin plug, pin 30
Notes: The Body ECU is under the driver dash, attached to the right side of the dash fuse box.
Hazards white - Body ECU, white 30 pin plug, pin 3
Notes: The Body ECU is under the driver dash, attached to the right side of the dash fuse box.
Turn Signal(L) yellow (F), yellow (R) + turn signal flasher right of dash FB, white 18 pin plug, pins 10 and 2
Turn Signal(R) lt. blue (F), lt. blue (R) + turn signal flasher right of dash FB, white 18 pin plug, pins 17 and 8
Reverse Light red + dash fuse box, white 36 pin plug (2F), pin 4
Door Trigger red - dash fuse box, white 36 pin plug (2F), pin 27
Dome Supervision green - dash fuse box, rear, white 40 pin plug (2B), pin 18
Trunk/Hatch Pin pink - Back Door ECU in liftgate, white 26 pin plug, pin 10
Hood Pin black - dash fuse box, white 40 pin plug (2D), pin 23
Trunk/Hatch Release use trunk release motor
Power Sliding Door N/A
Factory Alarm Arm lt. green (driver door key lock) - Body ECU, white 30 pin plug, pin 11
Notes: The Body ECU is under the driver dash, attached to the right side of the dash fuse box.
Factory Alarm Disarm gray (driver door key unlock) double - Body ECU, white 30 pin plug, pin 24
Notes: The Body ECU is under the driver dash, attached to the right side of the dash fuse box.
Disarm No Unlock use keysense
Tachometer pink ac data link connector, white 16 pin plug, pin 9
Wait to start N/A
Brake Wire PURPLE / green to blue + brake switch or dash fuse box, white 36 pin plug (2F), pin 29
Parking Brake lt. green - dash fuse box, white 40 pin plug (2D), pin 17
Horn Trigger gray to gray/blue - horn switch or dash fuse box, white 40 pin plug (2D), pin 29
Memory Seat 1 N/A
Memory Seat 2 N/A
Memory Seat 3 N/A
-------------
Posted By: chek
Date Posted: October 15, 2012 at 9:31 AM
Thank you!!! Any details on how to wire the hatch release? Does it just need a relay and a latched input?
Posted By: shortcircuit161
Date Posted: October 15, 2012 at 10:26 AM
You can run a relay and run the trunk release wire from the remote starter. The bypass module from idatalink (ADS-AL CA) shows it will work the locks and trunk for you thru the data wire in the truck. However, you may want to run the wires anyway since the keyless won't work (thru the data module) while the remote starter is running.
-------------
|