malibu alarm

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133019
Printed Date: May 08, 2025 at 9:39 PM

Topic: malibu alarm

Posted By: manny p
Subject: malibu alarm
Date Posted: December 18, 2012 at 5:45 PM

I think I might have asked this already but I need to find the factory alarm disarm/arm wire for the 2006 chevy malibu. I think it was 640 ohm disarm and straight ground to arm or vice versa. Any feedback would be appreciated.

-------------
Manny

Replies:

Posted By: shortcircuit161
Date Posted: December 19, 2012 at 6:06 AM

per Directwire -

Factory Alarm Arm      lt. green (driver door key cylinder)      -      driver kick or BCM, gray 72 pin plug (C1), pin 35
Notes: The BCM (Body Control Module) is part of the fuse/relay box on the front passenger side of the center console.
Factory Alarm Disarm      same as factory alarm arm      - 500 ohms

per Omega -

OEM Alarm Arm     ARMS WITH LOCK
OEM Alarm Disarm LT GREEN (-) AT BCM PLUG 1 PIN 35 USE 620 OHM RES

-------------

Print Page | Close Window