2011 F-150 FX2 Backup Camera Wiring

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133060
Printed Date: May 02, 2024 at 1:31 AM

Topic: 2011 F-150 FX2 Backup Camera Wiring

Posted By: pitcritter
Subject: 2011 F-150 FX2 Backup Camera Wiring
Date Posted: December 23, 2012 at 11:02 AM

I'm installing a new dash display in my '11 FX2. I'd like to connect the display to my factory backup camera. It uses a standard yellow RCA-in. I believe that the wires are in the drivers kick panel, but I need the color codes. Can anyone help?

Thanks, PC

Replies:

Posted By: i am an idiot
Date Posted: December 25, 2012 at 6:00 PM

I have no idea of the colors or the location. I can tell you that there will be only 3 or 4 wires in the cable that goes to the camera. One wire will have 12 volts on it when the vehicle is put in reverse. One wire will be video that you will need to supply to the display. There will be one or 2 wires that are grounded. If there are 2 wires, they will be electrically connected. If there is only one, you will have to connect it to ground and also the shield of the RCA cable that supplies video to the monitor.

Posted By: Ween
Date Posted: December 25, 2012 at 8:22 PM

the camera should have six wires on it. ignition and ground, video + and -, shield and control. ford uses a balanced output for video signals.
probably accessible in one of the 'a' pillars.
video + ... WHITE/ green
video - ... BROWN / violet
assume your vehicle does not have the factory navigation?
mark