2009 mitsubishi pajero/shogun/montero

Help, need a wiring diagram to install remote starter on 2009 Mitsubishi Pajero, in US it is called Montero and not very popular.

It is so unpopular that the stopped building it stateside in 2006. Do you have a volt meter?

Shogun was the Euro name, still sold over here. There are no diagrams available but it's extremely straight forward.
I'll paste the 06 Montero in the Downloads/Manuals section in the next 10 minutes, use that as a crib.
There were no real changes from then.
I did a new diesel L300 a few months ago, easy except the locks had to be wired via the motor wires as 5 wire, aka type "F".
For more backup, check the Mits. Outlander, look up "Ready Remote" or
"Bulldog" sites, free to the public.
Use a DMM and start testing I'd be glad to help.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Thanks for the help Howie.

I have Python responder one remote start + dlpk (doorlock module) + 556UW (remote start immobilizer interface module). So for the lock dlpk will do? if connected to can bus?

Howie,

I was thinking of getting idatalink ADS-AL CA all in one, to make the installation easy, but it is for Outlander, will it work with Pajero/Shogun if i flash it with mitsubishi soft.
Here is installation guide: guide
Appreciate your help

IMO based on experience use the 556 and hard wire the rest, you MIGHT
need a 451 twin relay module for the locks (5 wire) but TEST.
Again, IMO must people here make most of their mistakes not reading or understanding how these modules work.
The only times I've ever used DATA modules, even then as W2W NOT D2D* is when I know it will take me many extra hours to hard wire.
* If something isn't right how in the name of heaven do you test in DATA mode?
With most Japanese vehicles virtually everything is under or around driver dash so you can easily hard wire your solder joints.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Howie,

Can you please repost the 06 montero file as it is corrupted.
Finally want to install the whole thing but still want a complete diagram.

Regards

Will appreciate any help with the required wiring diagram!

Simply download it then open it as an Adobe file.
I just tried it that way and it works perfectly.
I've never had to use a crib sheet for a Mits and I've done all of them including owning 3 Galants.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

my mac does not want to open it, will try on windows with parallels

Howie, there is no can/bus interface? i shall wire all door lock/unlock by myself?

Howie can you please post a link to 451 twin relay module?

Are you kidding ?
Wiring instructions come with it, are also engraved on the black casing.
If you can't understand, don't attempt this job.


-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

I am not going to do it:-) Have to give it to professional:-))) There are relays for door locks in the manual, that are the ones?

Then give it to a pro; I haven't a clue which kind of door lock you have on the vehicle, a pro would find out very quickly.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.