Print Page | Close Window

clifford matrix rs 1.1l remote start wiring

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133633
Printed Date: June 21, 2025 at 6:42 AM


Topic: clifford matrix rs 1.1l remote start wiring

Posted By: tbothur0709
Subject: clifford matrix rs 1.1l remote start wiring
Date Posted: February 19, 2013 at 4:42 PM

I recently purchased a Clifford Matrix RS 1.1L remote start, and it didn't come with any of the wiring information. After calls to several installers in the area, and directed electronics, no body will share the wiring diagram for this set up unless they are talking to an "authorized dealer". They don't care how much installation or electrical experience I have, they want me to pay $300 to have it installed. Does anyone happen to have the installation manual laying around that they could scan or take pictures of? Thank you very much and I hope someone can help so I'm not out this money!



Replies:

Posted By: smokeman1
Date Posted: February 19, 2013 at 7:06 PM
I think the one you are looking for is in the download section of this site.  Just click on the download tab, do a search for clifford and I think is is on the 3rd page.

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation




Posted By: afmedic
Date Posted: February 19, 2013 at 7:23 PM
The RS 1.1 is in there, but not the 1.1L. There are more wires in the one I have. I tried using the one on here first, but it doesn't match up enough




Posted By: smokeman1
Date Posted: February 19, 2013 at 7:59 PM
How about this link:  https://www.directed.com/guides/manuals/ig/clifford/n909552.pdf

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation




Posted By: tbothur0709
Date Posted: February 19, 2013 at 8:35 PM
That is the same manual I have now, and it doesn't work for the 1.1L. The 1.1 has 6 wires in the main harness and the 1.1L has 8. Directed electronics make several brands, and viper and clifford are the only ones that they "require professional installation". I found an Avital remote start that has an identical harness to the clifford that I have, Im gunna roll with that one and see what happens!





Print Page | Close Window