2006 nissan murano
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135355
Printed Date: April 28, 2024 at 10:04 AM
Topic: 2006 nissan murano
Posted By: ffyter
Subject: 2006 nissan murano
Date Posted: November 23, 2013 at 9:59 AM
Hello folks. I'm installing a viper 5701 with the dball interface in a 2006 murano with smartkey. Dball instructions say to connect relay for auto headlights to pin 33 at bcm and wire is GREEN/ YELLOW. Wire at pin 33 is light blue. Can anyone confirm this is the right one even though colors don't match? Also, I want to be able to use my factory remote on occasion for starting and was going to use the turbo activation with a double pulse on lock button. Anyone know if the ground on the lock wire is strong enough to do this because all diagrams don't list a lock motor wire which is obviously preferred to normal lock wire?
Nick
Replies:
Posted By: Velocity Motors
Date Posted: November 23, 2013 at 10:30 AM
Use (+) park light wire instead RED / BLUE in driver's kick panel to rear of vehicle and trigger door pin wire ( LIGHT BLUE @ BCM above gas pedal ) with the re-arm output of the Viper to turn off headlights after shutdown and the RAP.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: ffyter
Date Posted: November 23, 2013 at 10:37 AM
Perfect thanks! Any idea on the factory remote question? Also what plug is the light blue wire in and how can I test to make sure I have the right one?
|