2001 buick century neutral safety switch
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135423
Printed Date: May 29, 2024 at 4:38 AM
Topic: 2001 buick century neutral safety switch
Posted By: jr789
Subject: 2001 buick century neutral safety switch
Date Posted: December 01, 2013 at 12:50 AM
Hi, im installing a Model 24921 remote ready starting unit on a 2001 Buick century, i have a little confusion in regards to attaching the wire from the aftermarket harness to the neutral safety switch wire.
H3/1 BLACK/ WHITE (-) NEUTRAL SAFETY SWITCH INPUT
In most applications the neutral safety wire should be attached to a chassis ground. This does not apply to
vehicles that crank the starter while the transmission is in gear.
Is that correct ? and just place the toggle switch inline??
Or should it jump off a specific wire between the ignition and the neutral safety switch on the transmission.
Im a little confused. Any help is appreciated. thanks in advance.
Replies:
Posted By: smokeman1
Date Posted: December 01, 2013 at 9:58 AM
Connect the wire to ground if the vehicle is an automatic. Test the vehicle by attempting to remote start the car, AS OUTLINED, on page 18 of the install guide. Testing the neutral safety switch.
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: jr789
Date Posted: December 07, 2013 at 10:20 PM
Thanks again 
|