2012 chevy traverse

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136197
Printed Date: May 08, 2025 at 10:36 AM

Topic: 2012 chevy traverse

Posted By: naresh1912
Subject: 2012 chevy traverse
Date Posted: March 01, 2014 at 10:19 AM

hey guys having problem 2012 traverse not cranking put a 9.6k resistor on the starter white wire and still don't crank is there something im diund wrong help please

-------------
Chris

Replies:

Posted By: smokeman1
Date Posted: March 01, 2014 at 1:36 PM

Need to know what you are doing? Remote starter? With what bypass?

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation

Posted By: kreg357
Date Posted: March 01, 2014 at 9:42 PM

It's a little more than just the one resistor. Does your ignition wiring set-up look like DEI TechTip 1605 that is included in this
ZIP file ? https://www.the12volt.com/installbay/file.asp?ID=1080

-------------
Soldering is fun!

Posted By: naresh1912
Date Posted: March 02, 2014 at 2:57 PM

its remote srart prostart 3471tw with fortin evo-all

-------------
Chris

Posted By: kreg357
Date Posted: March 02, 2014 at 8:45 PM

No resistor needed when using the Fortin EVO-ALL. Flash the EVO-ALL with the correct / recommended firmware version and
follow the Connection 6 install diagram.

-------------
Soldering is fun!

Print Page | Close Window