vauhaul corsa classic 2004 ignition
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136639
Printed Date: May 13, 2024 at 8:45 PM
Topic: vauhaul corsa classic 2004 ignition
Posted By: mr signal
Subject: vauhaul corsa classic 2004 ignition
Date Posted: May 13, 2014 at 12:40 PM
Which wire can I use for the ignition wire on the corsa classic as it have a transponder key module where the ignition wires should be.I'm fitting an alftermarket alarm on my friends car.I got my chassis,constant but I'm not sure about the ignition wire.
-------------
Mr signal
Replies:
Posted By: mr signal
Date Posted: May 13, 2014 at 12:41 PM
Corsa classic vauxhaul 2004 south africa
-------------
Mr signal
Posted By: howie ll
Date Posted: May 14, 2014 at 1:20 AM
Black, either at switch or main loom behind glovebox going into engine bay.
Warning, test there's at least one thick one that's constant 12V+ not ignition.
That same loom, behind the support tube behind the glove box will also give you lock unlock, starter, 12V+ constant and ground (earth).
Indicators may be, otherwise, left hand floor loom and possibly trunk trigger.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: mr signal
Date Posted: May 14, 2014 at 1:35 AM
Thanks Howie,I saw that wire yesterday,will test and use it today
-------------
Mr signal
|