2015 Ford Expedition EL Stereo Wiring Diagram
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139366
Printed Date: April 27, 2024 at 12:16 AM
Topic: 2015 Ford Expedition EL Stereo Wiring Diagram
Posted By: disinhouston
Subject: 2015 Ford Expedition EL Stereo Wiring Diagram
Date Posted: August 28, 2015 at 10:33 AM
I've recently purchased a JBL MS-8 "System Integration Digital Sound Processor" and have been searching for the stereo wiring diagram for my 2015 Ford Expedition EL with no luck.
The local stereo shop wants anywhere from $500 to $1000 just to install this unit that requires only pwr, rmt, gnd, high level in & hi level out connections... ridiculous! I have many years’ experience installing 12V products and am certain I can conquer this task but acquiring the factory amp locations and stereo wiring color codes are a must before I start tearing this vehicle apart.
Anyone have any suggestions?
Thanks in advance!
------------- DS
Replies:
Posted By: mleaser
Date Posted: September 03, 2015 at 8:21 PM
Radio 12V gray/red or WHITE/ red + radio, 24 pin plug, pin 1
Radio Ground BLACK/ blue - radio, 24 pin plug, pin 13
Radio Ignition gray/blue (base radio); (CAN bus, non base radio) + radio, 24 pin plug, pin 2
Radio Illumination blue/white (base radio) + dimmer radio, 24 pin plug, pin 3
Factory Amp Turn-on PURPLE / red + radio, 24 pin plug, pin 7
Power Antenna yellow/orange (except base radio) + radio, 24 pin plug, pin 2
Left Front Speaker (+/-) white - WHITE/ brown +,- radio, 24 pin plug, pins 8 - 21 or 22 - 10
On models with amplifier, the speaker wires are white - WHITE/ brown (woofer); GREEN/ orange - gray/orange (tweeter) at the amplifier in left rear quarter panel, 16 pin plug, pins 2 - 10; 3 - 11.
Right Front Speaker (+/-) WHITE/ purple - WHITE/ orange +,- radio, 24 pin plug, pins 11 - 12 or 23 - 11
On models with amplifier, the speaker wires are WHITE/ purple - WHITE/ orange (woofer); PURPLE / orange - yellow/orange (tweeter) at the amplifier in left rear quarter panel, 16 pin plug, pins 6 - 14; 7 - 15.
Left Rear Speaker (+/-) WHITE/ green - BROWN / yellow +,- radio, 24 pin plug, pins 9 - 22 or 21 - 9
On models with amplifier, the speaker wires are WHITE/ green - BROWN / yellow (woofer); GREEN/ brown - PURPLE / brown (tweeter) at the amplifier in left rear quarter panel, 16 pin plug, pins 4 - 12; 5 - 13.
Right Rear Speaker (+/-) BROWN / white - BROWN / blue +,- radio, 24 pin plug, pins 10 - 23 or 24 - 12
On models with amplifier, the speaker wires are BROWN / white - BROWN / blue (woofer); GREEN/ brown - PURPLE / brown (tweeter) at the amplifier in left rear quarter panel, 16 pin plug, pins 8 - 16; 5 - 13.
Center Channel (+/-) green - gray / YELLOW +,- amplifier in left rear quarter panel, 16 pin plug, pins 1 - 9
Subwoofer (+/-) PURPLE / green - GREEN/ wht (1); GREEN/ pur - gray (2) +,- amplifier in left rear quarter panel, 16 pin plug, pins 1 - 9; 2 - 10
Aux. Audio Input Left (+/-) blue - YELLOW /GREEN (without SYNC) +,- radio, 24 pin plug, pins 18 - 19
Aux. Audio Input Right (+/-) blue/green - WHITE/ green (without SYNC) +,- radio, 24 pin plug, pins 16 - 17
RSE Video (+/-) WHITE/ green - BROWN / purple (rearview camera video) +,- front control/display mod, 12 pin plug, pins 6-12
On models with SYNC 2, the rearview camera video wires are WHITE/ green - BROWN / purple at the SYNC Module/display, 54 pin plug, pins 14 - 15.
RSE Audio Left (+/-) blue - gray/orange (SYNC audio) +,- radio, 26 pin plug, pins 12 - 25
RSE Audio Right (+/-) PURPLE / green - BROWN / white (SYNC audio) +,- radio, 26 pin plug, pins 13 - 26
Posted By: disinhouston
Date Posted: September 05, 2015 at 9:16 AM
Thanks a lot for this!!!
-------------
DS
Posted By: disinhouston
Date Posted: July 10, 2016 at 12:29 PM
Do have the wiring color codes for factory amp input plug? I need to tie these input wires into the high level input on my JBL MS-8. Your output color codes were spot on!
Thanks.
-------------
DS
Posted By: disinhouston
Date Posted: July 10, 2016 at 12:30 PM
Do have the wiring color codes for factory amp input plug? I need to tie these input wires into the high level input on my JBL MS-8. Your output color codes were spot on!
Thanks.
-------------
DS
Posted By: i am an idiot
Date Posted: July 10, 2016 at 1:01 PM
Chances are the level coming out of the radio will not be enough to drive your amplifier. You will probably need to get signal from the output.
|