2016 Tacoma push to start
Printed From: the12volt.comForum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140908
Printed Date: May 12, 2025 at 4:24 AM
Topic: 2016 Tacoma push to start
Posted By: artesho
Subject: 2016 Tacoma push to start
Date Posted: February 24, 2016 at 3:47 AM
Hi guys, I want to install this TRD push start button (Pt #:MS422-00001 or 89611-SP000) into my 2016 Tacoma. I thought it would be a direct replacement, but after taking apart the dash and seeing the connectors, it's clear that I have to either a) get the correct TRD push button and try to sell the one I have or b) Figure out the wiring and convert the vehicle's female 10 pin harness to the replacement push start button 11 pin male harness.
I am requesting the wiring diagram for the first and last pictures attached.
Also where could I tap into to get a 5v (+), (-), and ground for the additional 3 pins that I will need to power up the LED?
I hope this was detailed enough to get some help...Thanks in advance for any help.
TRD Red push start button with green LED PT #MS422-0001 or 89611-SP000
Top is the TRD push start button pins
Bottom is the OEM stock push start button pins
Wires and harness from the '16 Tacoma for the push start button
I am requesting the wiring diagram for the first and last pictures attached.
Also where could I tap into to get a 5v (+), (-), and ground for the additional 3 pins that I will need to power up the LED?
I hope this was detailed enough to get some help...Thanks in advance for any help.
TRD Red push start button with green LED PT #MS422-0001 or 89611-SP000
Top is the TRD push start button pins
Bottom is the OEM stock push start button pins
Wires and harness from the '16 Tacoma for the push start button
Replies:
Posted By: artesho
Date Posted: February 24, 2016 at 4:03 AM
Also I have found that these vehicles are compatible with the Red TRD push start button (MS422-00001) that I want to install but I have not been able to find any wiring information for what wire does what.
Also, where can I find the 11pin female harness for when I get the wiring info, I can pin that out and make the adapted harness to plus directly into the new button?
Also, where can I find the 11pin female harness for when I get the wiring info, I can pin that out and make the adapted harness to plus directly into the new button?