2013 Nissan Murano remote start wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141086
Printed Date: October 31, 2025 at 8:10 AM
Topic: 2013 Nissan Murano remote start wiring
Posted By: fosgate24360
Subject: 2013 Nissan Murano remote start wiring
Date Posted: March 26, 2016 at 8:35 AM
Hi, wondering if anyone knows the wiring layout for a 2013 nissan murano for installing a remote start. I see all years listed but 2013.
Replies:
Posted By: wirewise
Date Posted: March 26, 2016 at 9:13 AM
NISSAN / MURANO / 2013 / Remote Start
12volts white (40A) + BCM behind instrument cluster, black 3 pin plug, pin 1
Starter red - BCM behind instrument cluster, gray 40 pin plug, pin 21
Second Starter brown (push-button start) - push-button ign sw or BCM behind instr cluster, gry 40 pin plg, pin 29
Ignition brown + BCM behind instrument cluster, black 40 pin plug, pin 11
Second Ignition blue - BCM behind instrument cluster, gray 40 pin plug, pin 16
Third Ignition N/A
Accessory yellow + BCM behind instrument cluster, black 40 pin plug, pin 31
Second Accessory blue + BCM behind instrument cluster, black 40 pin plug, pin 24
Keysense yellow + key slot or BCM behind instrument cluster, green 40 pin plug, pin 10
Power Lock use factory alarm arm or insert pin - BCM behind instrument cluster, green 40 pin plug, pin 17
Power Unlock use factory alarm disarm or insert pin - BCM behind instrument cluster, green 40 pin plug, pin 15
Lock Motor purple 5 wire BCM behind instrument cluster, white 16 pin plug, pin 5
Unlock Motor green 5 wire BCM behind instrument cluster, white 16 pin plug, pin 6
Parking Lights+ red + dash fuse box, white 10 pin plug, pin 8
Parking Lights- N/A
Hazards green - hazard switch or BCM behind instr cluster, black 40 pin plug, pin 39
Turn Signal(L) brown + BCM behind instrument cluster, white 16 pin plug, pin 15
Turn Signal(R) green + BCM behind instrument cluster, white 16 pin plug, pin 14
Reverse Light red + driver kick, harness to rear
Door Trigger lt. blue - BCM behind instrument cluster, green 40 pin plug, pin 39
Dome Supervision yellow (suv), green (crosscabriolet) - BCM behind instrument cluster, white 16 pin plug, pin 16
Trunk/Hatch Pin yellow (suv), red (crosscabriolet) - BCM behind instrument cluster, gray 40 pin plug, pin 35 or 19
Hood Pin N/A
Trunk/Hatch Release lt. grn (rear hndl sw/suv), blue (dash sw/xcabrio) - BCM behind instrument cluster, gray 40 pin plug, pin 36
Notes: On models with power liftgate, the open/close is yellow (-) at the power liftgate switch, gray 8 pin plug, pin 2.
Power Sliding Door N/A
Factory Alarm Arm blue (driver door key lock) - power window main switch, white 16 pin plug, pin 4
Factory Alarm Disarm red (driver door key unlock) double - power window main switch, white 16 pin plug, pin 6
Disarm No Unlock Intelligent Key and ignition
Tachometer RED / bk, RED / wh, RED / yl, lt. gn/rd, bu/wh, or pk/bk ac any fuel injector, gray 2 pin plug, pin 2
Wait to start N/A
Brake Wire blue + dash fuse box, wht 10 pin plg, pin 3 or BCM, grn 40 pin plg, pin 7
Parking Brake pink to green - parking brake switch or instrument cluster, white 40 pin plug, pin 26
Horn Trigger yellow - horn switch, gray 8 pin plug, pin 8
Memory Seat 1 red - driver kick, harness to rear
Memory Seat 2 lt. blue - driver kick, harness to rear
Memory Seat 3 N/A -
-------------
~wirewise~
Verify all wiring with your meter before making any connections!
Posted By: fosgate24360
Date Posted: April 17, 2016 at 9:27 PM
Thank you kindly!
Posted By: fosgate24360
Date Posted: June 19, 2016 at 1:41 PM
Trying to wire up a 3 wire led scanner(red, black, and yellow wire) to 2013 nissan murano. It has a remote start installed but has no negative armed output(orange wire on module brain). Pretty sure will need a relay, just dont know how to wire it up.
Posted By: fosgate24360
Date Posted: June 20, 2016 at 9:29 PM
Anyone?
Posted By: tonanzith
Date Posted: June 25, 2016 at 11:47 PM
What brand scanner? The varad brand has optional wiring where it automatically comes on when the key is off
-------------
Gary Sather
Posted By: fosgate24360
Date Posted: June 26, 2016 at 8:21 AM
The one I picked up is plasmaglow brand(girlfriend had to have pink color and plasmaglow is only one I could find in pink lol). I did end up getting it all working with a relay:
scanner red wire to 12v
scanner black wire to ground
scanner yellow wire to pin 87a
pin 30 and 86 ground
pin 85 ignition
on when key is removed, off when ignition is on
|