Need help with 1994 Chrysler LHS

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14158
Printed Date: July 05, 2025 at 7:55 PM

Topic: Need help with 1994 Chrysler LHS

Posted By: mosaick
Subject: Need help with 1994 Chrysler LHS
Date Posted: May 29, 2003 at 1:47 PM

I am going to install an Alpine SEC-100s in my 1994 Chrysler LHS, but I cannot find information on how to bypass existing Anti-Theft System with keyless entry or if it is possible to intergrate the new with the original.

In need of help

Replies:

Posted By: Velocity Motors
Date Posted: May 29, 2003 at 2:02 PM

If all you are installing is the Alpine unit, then you do not need to bypass the Immobilizer on the LHS, this is only for remote starter installations.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: mosaick
Date Posted: May 30, 2003 at 1:58 PM

Thank you for your help Jeff.

So, will I need to disable the original receiver? It engages when the power locks are used or with the remote(Which does not work) and is supposed to disengage with the use of the keyless remote(Which does not work) or the door key. Now when the power locks are used the alarm will go off when the key is used to open the door which is supposed to disable it. The problem is that the original Chrysler keyless receiver needs to be replaced. The cost is 219.00 just for the new Chrysler receiver. So I purchased the Alpine for 100.00 and have more features.

Thank you again for your assistance.