2007 king ranch /klon
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142407
Printed Date: May 02, 2024 at 10:24 AM
Topic: 2007 king ranch /klon
Posted By: bat9905
Subject: 2007 king ranch /klon
Date Posted: January 11, 2017 at 12:38 PM
I've never used klon . I'm currently registered with web link and have a cable flashing modules but looking to use klon technology . Anything I should know before taking on this . I hate losing the install because the customer only has one key. Thanks for any help
-------------
bat9905
Replies:
Posted By: kreg357
Date Posted: January 11, 2017 at 7:09 PM
KLON works great! It's easier than doing the routine with two factory keys and hitting the remote start button.
Only two things to mention.
If you do "on-site" installs, make sure you have a good WI-Fi signal. I use a small laptop in the field.
I usually mate the R/S brain to the Bypass module during bench prep, so I leave the assembly in the vehicle during the KLON
process. I have to remember to allow some access room for pressing the button and disconnecting the harnesses, etc. The
small laptop sits on the drivers seat and the ADS USB cable reaches fine.
Other than that, it's real straight forward. Fortin's DCryptor process is a little confusing the first time you use it but
it works well, too.
-------------
Soldering is fun!
Posted By: bat9905
Date Posted: January 11, 2017 at 9:54 PM
Great!! thanks for the advice .
-------------
bat9905
|