Print Page | Close Window

2000 Nissan Maxima (Factory Amp Turn On)

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14248
Printed Date: May 02, 2024 at 2:12 AM


Topic: 2000 Nissan Maxima (Factory Amp Turn On)

Posted By: rotaryrx7
Subject: 2000 Nissan Maxima (Factory Amp Turn On)
Date Posted: May 31, 2003 at 2:31 PM

As the title says I need to find out which wire on the harness that plugs into the factory Bose Amplifier is the turn on wire. I have tried searching around but haven't had any luck. Thanks in advance!

Dan




Replies:

Posted By: trusdamanr
Date Posted: May 31, 2003 at 4:01 PM
use a multimeter,put a cd in and out until you find a wire that shows 0volts when the cd is out and 12 volts when the cd is on...if you use the radio youll prob find the power antenna wire which will show the same thing..




Posted By: esmith69
Date Posted: June 01, 2003 at 6:08 PM
If you're looking for a turn-on wire you can always just use the radio's +12 volt switched wire.  That'll show 12 volts only when the key is in the "ACC" or "RUN" position.

-------------
Ethan
-----
"Patience, persistence, and perspiration make an unbeatable combination for success"
Donate to the12volt.com




Posted By: rotaryrx7
Date Posted: June 04, 2003 at 5:46 PM

Thanks for the responses. I did end up using the radio turn on, however it would still help me out to know which wire it is. Thanks for the advice!

Dan






Print Page | Close Window