2011 Toyota Highlander Alarm/Remote Start Wiring

Hi, I hope im in the right section but can anyone help with a wiring diagram for a 2011 Toyota Highlander with regular key. Thanks.much

HIGHLANDER      2011-2013
KEY      T-HARNESS      IMMOBILIZER
N/A      N/A      TOYOTAS TRANSPONDER ANTI-THEFT SYSTEM, SEE NOTE #1
PART      COLOR      LOCATION      DIAGRAM
12 VOLT CONSTANT      CONNECT TO BATTERY ONLY!           
STARTER      YELLOW (+)      @ IGNITION SWITCH, WHITE 8-PIN PLUG, PIN 7      
STARTER 2      RED (+)      @ IGNITION SWITCH, WHITE 8-PIN PLUG, PIN 3      
IGNITION 1      BLACK (+)      @ IGNITION SWITCH, WHITE 8-PIN PLPUG, PIN 6      
IGNITION 2      LIGHT BLUE (+)      @ IGNITION SWITCH, WHITE 8-PIN PLUG, PIN 1      
IGNITION 3      N/A           
ACCESSORY/HEATER BLOWER 1      GRAY (+)      @ IGNITION SWITCH, WHITE 8-PIN PLUG, PIN 2      
ACCESSORY/HEATER BLOWER 2      N/A           
KEYSENSE      LIGHT BLUE (-)      @ IGNITION KEY SWITCH, WHITE 2-PIN PLUG, PIN 1      
PARKING LIGHTS ( - )      LIGHT BLUE (-)      @ HEADLIGHT SWITCH, WHITE 20-PIN PLUG, PIN 18      
PARKING LIGHTS ( + )      N/A           
POWER LOCK      LIGHT BLUE or BEIGE (-) TYPE B      @ DRIVERS KICK PANEL, BLACK 18-PIN PLUG, PIN 14      
POWER UNLOCK      GREEN (-) TYPE B      @ DRIVERS KICK PANEL, BLACK 18-PIN PLUG, PIN 9      
LOCK MOTOR WIRE      RED (5-WIRE)      @ DRIVERS KICK PANEL, BLACK 14-PIN PLUG, PIN 4      
DOOR TRIGGER      BLUE (-)      @ DASH FUSEBOX, BLACK 18-PIN PLUG, PIN 15      
DOMELIGHT SUPERVISION      LIGHT BLUE (-)      @ DASH FUSEBOX, WHITE 12-PIN PLUG, PIN 5      
TRUNK RELEASE      YELLOW (-) ( LIFTGATE), ORG or BEIGE (-) (GLASS)      @ DRIVER KICK, GRAY 12-PIN PLUG, PIN 1; BLACK 18-PIN PLUG, PIN 13      
SLIDING POWER DOOR      N/A           
HORN      GRAY (-)      @ DASH FUSEBOX, WHITE 16-PIN PLUG, PIN 11      
TACH      NOT REQUIRED FOR REMOTE STARTING           
WAIT TO START LIGHT      N/A           
BRAKE      BLUE (+)      @ BRAKE SWITCH, WHITE 4-PIN PLUG, PIN 1      
FACTORY ALARM DISARM      USE "KEYSENSE" TO DISARM           
ANTI-THEFT      TOYOTA'S TRANSPONDER ANTI-THEFT SYSTEM      @ IGNITION BARREL      
NOTES
NOTE #1: VEHICLE IS EQUIPPED WITH A TRANSPONDER ANTI-THEFT SYSTEM AND REQUIRES A B-SERIES REMOTE STARTER AND EXTRA IGNITION KEY. IF NOT INSTALLING A B-SERIES REMOTE STARTER THE 791 BYPASS MODULE AND EXTRA IGNITION KEY IS REQUIRED FOR REMOTE STARTING.

IF YOU DO NOT HAVE OR WISH NOT TO USE YOUR SPARE KEY FOR THE B-SERIES REMOTE STARTER OR 791 BYPASS MODULE WE OFFER A KEYLESS INTERFACE MODULE, PART# "PKALL."

-------------
~wirewise~ Verify all wiring with your meter before making any connections!

Thank you very much.