Print Page | Close Window

2016 nissan rogue interlock installation

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143440
Printed Date: March 28, 2024 at 6:15 PM


Topic: 2016 nissan rogue interlock installation

Posted By: tserigne
Subject: 2016 nissan rogue interlock installation
Date Posted: August 07, 2017 at 4:44 PM

Need wiring for interlock device, just starter kill, 12 volt constant, and ignition +
thanks

-------------
car nut



Replies:

Posted By: wirewise
Date Posted: August 07, 2017 at 4:56 PM
This is without smart key: https://www.the12volt.com/installbay/downloads.asp?srch=all&term=rogue

If it has smart key, the wiring may or may not be the same. You'll have to check.

-------------
~wirewise~ Verify all wiring with your meter before making any connections!




Posted By: tserigne
Date Posted: August 07, 2017 at 5:07 PM
i need a + starter wire, im thinking under the hood from starter relay. Its common that i have to run wires to starter relay underhood.

-------------
car nut




Posted By: i am an idiot
Date Posted: August 07, 2017 at 5:56 PM
Have you located the starter relay under the hood? Do you have a volt meter?




Posted By: howie ll
Date Posted: September 02, 2017 at 1:41 AM
Why do you need a + starter wire? Polarity doesn't matter to the a starter kill internal relay switch connections providing it's supplied with ignition (+) and ground.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.




Posted By: i am an idiot
Date Posted: September 04, 2017 at 1:11 PM
I am pretty sure his interlock comes with a prewired socket for the starter kill relay. You will have to discard the socket and wire the relay as follows. 95 goes to the wire of the interlock that disables the starter. 85 connects to ignition. Cut the negative starter wire and connect one end of that to 30. The other cut wire connects to 87a





Print Page | Close Window