Print Page | Close Window

ZD Ford Escape 2008 Stereo Wiring

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143534
Printed Date: April 26, 2024 at 8:46 AM


Topic: ZD Ford Escape 2008 Stereo Wiring

Posted By: madhouse1981
Subject: ZD Ford Escape 2008 Stereo Wiring
Date Posted: September 10, 2017 at 6:48 AM

Hi guys, have searched high and low for hours as yet unable to locate a color code wiring diagram for my stereo.

I have currently worked out black/ ground black/blue = Constant 12V. Unable to locate accessories assume will have to go of the cig lighter but will still need al speakers, antenna plus minus for the volume switches etc.

Any help greatly appreciated.



Replies:

Posted By: i am an idiot
Date Posted: September 10, 2017 at 1:27 PM
There is not a switched wire. You will have to use cig lighter if it is switched.

https://www.the12volt.com/installbay/forum_posts.asp?tid=74637




Posted By: i am an idiot
Date Posted: September 10, 2017 at 6:32 PM
Would this have helped?

https://metraonline.com/part/70-5520




Posted By: madhouse1981
Date Posted: September 11, 2017 at 5:30 AM
Thanks guys,

Thought thay may have been the cane,

"i am an idiot" is that plug a 16 pin??




Posted By: madhouse1981
Date Posted: September 11, 2017 at 5:32 AM
https://i.imgur.com/LrMr9t7.jpg

I currently have a 16 and 4 pin :-s




Posted By: madhouse1981
Date Posted: September 11, 2017 at 6:18 AM
Some more photo's

https://imgur.com/a/6Cv2k




Posted By: i am an idiot
Date Posted: September 11, 2017 at 5:15 PM
That is not the same as the plug I posted. That looks a lot like a. Panasonic AKA Matsushita plug. Does the radio have either one of those names on the label? Or Clarion?




Posted By: madhouse1981
Date Posted: September 12, 2017 at 1:39 AM
Yes it a Panasonic made in Taiwan hence the problem lol




Posted By: madhouse1981
Date Posted: September 13, 2017 at 10:39 PM
Can anybody help please?




Posted By: i am an idiot
Date Posted: September 14, 2017 at 10:20 AM
Did you look at that first link I posted? It tells you how to find the wires.





Print Page | Close Window