2017 Chevy Cruze LS Sedan Stereo Wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143614
Printed Date: April 29, 2024 at 5:46 AM
Topic: 2017 Chevy Cruze LS Sedan Stereo Wiring
Posted By: jerpenn72
Subject: 2017 Chevy Cruze LS Sedan Stereo Wiring
Date Posted: October 11, 2017 at 3:54 PM
Looking for wiring diagram for 2017 Chevy Cruze LS Sedan. Need to find diagram of Stereo system (attempting to add an aftermarket amplifier and subwoofer to stock, non-amplified system). Here are the features:
Chevy My Link
OnStar
Non-amplified stereo
No steering wheel controls
No cruise control
Replies:
Posted By: mgoetz74
Date Posted: October 12, 2017 at 2:42 PM
LR-green+ & green/black- RR-white+ & blue/black-. amp turn on will have to go to the accessory at the key blue/white and probably need a relay for it. i don't know if any of the cigg. lighters are switch on that car
Posted By: jerpenn72
Date Posted: November 04, 2017 at 3:54 PM
Does anyone have a line on which colored connector in the main power distribution block is the one that has the stereo speakers? The block I'm referring to is up above and behind the hood release under the left lower side of the dash.
Posted By: rs specialist
Date Posted: November 16, 2017 at 5:13 PM
I would guess that the speaker wires will not be going to the fuse block. You can grab them at the back of the radio or in the harness going to the speakers.
Posted By: jerpenn72
Date Posted: November 16, 2017 at 5:42 PM
Just an update that might help future members with same question.
The wires in question were located beneath the sill cover for driver’s door. The wiring junction is located just beneath the hood release, and GM was kind enough to have the speaker wires leaving that harness as twisted pairs, so it made it very easy to identify the correct wires.
Thanks for the assist!
|