2013 Hyundai Tuscon Alarm/Remote Start Wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143795
Printed Date: May 01, 2025 at 3:08 AM
Topic: 2013 Hyundai Tuscon Alarm/Remote Start Wiring
Posted By: kaveh
Subject: 2013 Hyundai Tuscon Alarm/Remote Start Wiring
Date Posted: November 20, 2017 at 2:46 PM
Hi,
I am trying to create a remote start for my Tucson. I have built the needed electrical board and programmed all the needed microcontrolers. Now I need the wiring diagram for my car so I could connect my board to it. Specificaly I need the wiring for the lock & unlock system and more important, the Engine Start-Stop Switch wiring diagram.
Any help would be appreciated.
Replies:
Posted By: kaveh
Date Posted: November 20, 2017 at 2:47 PM
Just in case, The car is:
Hyundai Tucson 2013 limited edition
Posted By: wirewise
Date Posted: November 20, 2017 at 3:09 PM
TUCSON 2010-2016
KEY T-HARNESS IMMOBILIZER
N/A N/A TRANSPONDER TYPE REQUIRES BYPASS AND EXTRA KEY TO REMOTE START. VEHICLES 2015 AND UP AND VEHICLES WITH SMART KEY AND PUSH TO START REQUIRE A DBALL2 INTERFACE FOR REMOTE STARTING
PART COLOR LOCATION DIAGRAM
12 VOLT CONSTANT RED (+), NOTE #2 @ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 1
STARTER GREEN (+), NOTE #3 @ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 3
STARTER 2 WHITE (+) and BLUE (+), (PUSH-START BUTTON)
IGNITION 1 PINK (+), NOTE #4 @ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 4
IGNITION 2 N/A
IGNITION 3 N/A
ACCESSORY/HEATER BLOWER 1 BLUE (+), NOTE #5 @ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 2
ACCESSORY/HEATER BLOWER 2 WHITE (+), NOTE #6 @ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 6
KEYSENSE N/A
PARKING LIGHTS ( - ) YELLOW (-) @ HEADLIGHT SWITCH, (WHITE, 13-PIN PLUG), PIN 1
PARKING LIGHTS ( + ) GREEN(+)(Left) and YELLOW(+)(Right) use both! @ DASH FUSE BOX, (WHITE, 40-PIN PLUG(D), PINS 2 and 1
POWER LOCK BLUE/BLACK (TYPE B) @ DASH FUSE BOX, (WHITE, 40-PIN PLUG(D), PIN 37
POWER UNLOCK GRAY/BLACK (TYPE B), NOTE #7 @ DASH FUSE BOX, (WHITE, 40-PIN PLUG(D), PIN 36
LOCK MOTOR WIRE ORANGE (5-Wire Type) @ DASH FUSE BOX, (WHITE, 20-PIN PLUG(E), PIN 9
DOOR TRIGGER GREEN/ORANGE (-) @ DASH FUSE BOX, (WHITE, 40-PIN PLUG(D), PIN 24
DOMELIGHT SUPERVISION BROWN (-) @ DRIVERS FRONT A Pillar, (WHITE, 22-PIN PLUG), PIN 1
TRUNK RELEASE YELLOW/BLACK (-), NOTE #8 @ DASH FUSE BOX, (WHITE, 40-PIN PLUG(D), PIN 35
SLIDING POWER DOOR N/A
HORN GRAY (-) in DRIVERS KICK PANEL, (WHITE, 24-PIN PLUG), PIN 20
TACH GREEN, BLUE, GRAY or BROWN (AC) @ Any FUEL-INJECTOR
WAIT TO START LIGHT N/A
BRAKE GREEN (+) @ BRAKE PEDAL SWITCH or in DRIVERS KICK PANEL, (WHITE, 24-PIN PLUG), PIN 6
FACTORY ALARM DISARM PINK (-) and GRAY (-), use both, Requires Double Pulse, NOTE #9 @ DASH FUSE BOX, (WHITE, 40-PIN PLUG(D), PINS 28 and 31
ANTI-THEFT HYUNDAI'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1 @ IGNITION SWITCH TUMBLER
NOTES
NOTE #1: This vehicle May Be Equipped with HYUNDAI'S TRANSPONDER ANTI-THEFT SYSTEM, check the OWNERS MANUAL for this vehcile or contact your HYUNDAI Dealer to see if the vehicle has a Special programmed Ignition Key, if it does, then for REMOTE STARTING you will need the 791 BYPASS Module and an Extra Ignition key.
NOTE #2: on Vehicles with SMART KEY, this wire is in the DRIVERS KICK PANEL, (BLUE, 15-PIN PLUG), PIN 12
NOTE #3: on Vehicles with SMART KEY, this wire is RED (+) at the DASH FUSE BOX, (REAR WHITE, 16-PIN PLUG(J), PIN 12
NOTE #4: on Vehicles with SMART KEY, this wire is at the DASH FUSE BOX, (REAR WHITE, 18-PIN PLUG(H), PIN 14
NOTE #5: on Vehicles with SMART KEY, this wire is at the DASH FUSE BOX, (REAR WHITE, 16-PIN PLUG(J), PIN 13
NOTE #6: on Vehicles with SMART KEY, this wire is at the DASH FUSE BOX, (REAR WHITE, 16-PIN PLUG(J), PIN 11
NOTE #7: to UNLOCK just the DRIVERS DOOR use the YELLOW/BLACK (-) at the DASH FUSE BOX, (REAR, WHITE, 28-PIN PLUG(F), PIN 8.
NOTE #8: TEST this wire while Opening the Liftgate from the Handle on the REAR of the Vehicle
NOTE #9: TEST this wire while Turning the KEY in the DRIVERS DOOR.
------------- ~wirewise~
Verify all wiring with your meter before making any connections!
|