2013 Ford Explorer Remote Start Wiring

Does any body have a remote start  wiring diagram for a 2013 Ford explorer?

-------------
Luis Diaz

FORD EXPLORER      2011-2015
KEY      T-HARNESS      IMMOBILIZER
N/A      N/A      FORDS "SECURILOCK" TRANSPONDER ANTI-THEFT SYSTEM,VEHICLES WITH SMART KEY AND PUSH TO START REQUIRE A DBALL2 INTERFACE MODULE FOR REMOTE STARTING, See NOTE #1
PART      COLOR      LOCATION      DIAGRAM
12 VOLT CONSTANT      CONNECT TO BATTERY ONLY!      @ BATTERY      
STARTER      BLUE/WHITE (+)      @ IGNITION SWITCH, BLACK 7-PIN PLUG, PIN 7      
STARTER 2                
IGNITION 1      WHITE/ORANGE (+)      @ IGNITION SWITCH, BLACK 7-PIN PLUG, PIN 1      
IGNITION 2      N/A           
IGNITION 3      N/A           
ACCESSORY/HEATER BLOWER 1      PURPLE/GREEN (+)      @ IGNITION SWITCH, BLACK 7-PIN PLUG, PIN 6      
ACCESSORY/HEATER BLOWER 2      N/A           
KEYSENSE      N/A           
PARKING LIGHTS ( - )      N/A           
PARKING LIGHTS ( + )      YELLOW/BLUE (+)      @ BCM, GRAY 10-PIN PLUG(E), PIN 6, SEE NOTE #2      
POWER LOCK      BLUE/GREEN (-) TYPE B      IN DRIVERS KICK PANEL or BCM, BLACK 26-PIN PLUG(C), PIN 6, SEE NOTE #2      
POWER UNLOCK      YELLOW/PURPLE (-) TYPE B      IN DRIVERS KICK PANEL or BCM, BLACK 26-PIN PLUG(C), PIN 8, SEE NOTE #2      
LOCK MOTOR WIRE      GRAY/BROWN (5-WIRE)      IN DRIVERS KICK PANEL, AT DOOR HARNESS      
DOOR TRIGGER      GRAY/PURPLE (+)      Connect positive (+) door trigger wire from alarm to dome light supervision on car      
DOMELIGHT SUPERVISION      GRAY/PURPLE (+)      @ BCM, GRAY 12-PIN PLUG(A), PIN 1, SEE NOTE #2      
TRUNK RELEASE      BROWN (-)      IN DRIVERS KICK PANEL or BCM, BLACK 26-PIN PLUG(C), PIN 23, SEE NOTE #2      
SLIDING POWER DOOR      N/A           
HORN      PURPLE/GREEN (-)      @ HORN SWITCH or BCM, BLACK 52-PIN PLUG(B), PIN 33, SEE NOTE #2      
TACH      SEE LOCATION---> (AC)      @ ANY FUEL-INJECTOR, 2-PIN PLUG, PIN 1      
WAIT TO START LIGHT      N/A           
BRAKE      BLUE/ORANGE (+)      @ TRAILER BRAKE WIRE HARNESS, GRAY 6-PIN PLUG, PIN 2, SEE NOTE #3      
FACTORY ALARM DISARM      DISARMS with FACTORY REMOTE ONLY!!           
ANTI-THEFT      FORDS "SECURILOCK" TRANSPONDER ANTI-THEFT SYSTEM, SEE NOTE #1      @ IGNITION SWITCH TUMBLER      
NOTES
NOTE#1: VEHICLE IS EQUIPPED WITH FORD'S "SECURILOCK" TRANSPONDER KEY ANTI-THEFT SYSTEM AND REQUIRES AN EXTRA IGNITION KEY AND A B-SERIES REMOTE STARTER WITH BUILT IN BYPASS MODULE FOR REMOTE STARTING. IF YOU'RE NOT INSTALLING A B-SERIES REMOTE STARTER A #791 BYPASS MODULE AND EXTRA IGNITION KEY IS REQUIRED

IF YOU DO NOT HAVE A SPARE KEY OR WISH NOT TO PLACE THE SPARE KEY INSIDE THE B-SERIES REMOTE STARTER or #791 BYPASS MODULE. VEHICLES WITH SMART KEY AND PUSH TO START REQUIRE A DBALL2 INTERFACE MODULE FOR REMOTE STARTING.

NOTE #2: The BCM is located part of the DASH FUSE BOX, under the DRIVERS DASH.

NOTE #3 The TRAILER BRAKE PRE-WIRE HARNESS is located behind the HOOD RELEASE

-------------
~wirewise~ Verify all wiring with your meter before making any connections!