Print Page | Close Window

2016 Dodge Ram 2500 Diesel Wiring

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144538
Printed Date: April 19, 2024 at 3:08 PM


Topic: 2016 Dodge Ram 2500 Diesel Wiring

Posted By: alwayswet
Subject: 2016 Dodge Ram 2500 Diesel Wiring
Date Posted: June 20, 2018 at 5:49 PM

I have found the post for 2014 Ram but would like to know if the wiring is the same. I need to install a vehicle tracker for a fleet vehicle and just need 12v constant, switched and ground locations the rest of wiring info would be helpful for later or someone else if someone has it.

Thank you!
Bill

-------------
Freedom Isn't Free, Never Forget 9/11



Replies:

Posted By: i am an idiot
Date Posted: June 20, 2018 at 8:21 PM
With regular key, or smart key?




Posted By: i am an idiot
Date Posted: June 20, 2018 at 8:24 PM
Regular Key

12 Volts      Red (40A)      +      BCM under driver dash, black 4 pin plug (B), pin 3           
Ground      (chassis ground)                     
Starter      Lt. Blue/Tan (for starter kill only)      +      BCM under driver dash, black 24 pin plug (A), pin 19           
Ignition      Violet/Brown      +      Ignition Node (ignition switch), black 6 pin plug, pin 4

Smart Key

12 Volts      red (40A)      +      BCM under driver dash, black 4 pin plug (B), pin 3           
Ground      (chassis ground)                     
Starter      lt. blue/tan (for starter kill only)      +      BCM under driver dash, black 24 pin plug (A), pin 19           
Ignition      pink/white (for ignition sense only)      +      BCM under driver dash, black 48 pin plug (E), pin 27




Posted By: alwayswet
Date Posted: June 24, 2018 at 4:24 PM
Tip start key.

Excuse my ignorance, but is the 12v switched tied to the computer and should it be isolated in any way? Just looking for a source that is 12 v when ignition on, should I use one of the feeds for the 12v outlet?

Thank you

-------------
Freedom Isn't Free, Never Forget 9/11





Print Page | Close Window