Ignition Switch Wiring, 01 Acura CL
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144559
Printed Date: April 29, 2024 at 2:29 PM
Topic: Ignition Switch Wiring, 01 Acura CL
Posted By: tjpeaden
Subject: Ignition Switch Wiring, 01 Acura CL
Date Posted: June 30, 2018 at 9:59 AM
Im trying to bypass the ignition switch in a 01 Acura cl to replace with Ignition toggle & push button switch and I need help on wiring diagram and if this can be done?
-------------
Tim Peaden
Replies:
Posted By: mgoetz74
Date Posted: June 30, 2018 at 12:44 PM
you'd have to leave a key in it for the immobilize. I have never done a add on PTS thing before. 12 volts-white starter- black/white Ignition-black/yellow Accessory-yellow. You'd have to look around the key cylinder for a green plug that would have about 5 wire and a red and a blue next to each other.
-------------
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!
Posted By: tjpeaden
Date Posted: July 04, 2018 at 4:40 PM
Is it possible to wire an Ignition toggle switch and push button start on 2001 Acura cl s.
-------------
Tim Peaden
Posted By: i am an idiot
Date Posted: July 04, 2018 at 5:38 PM
Do you have a key that starts it? Is the ignition switch losing ignition when you turn it to the start position? If it is, you can easily put a push to start button. If you are just wanting to do this for the bling factor, it will probably be more work than you are wanting to do. As stated earlier you will have to leave a key inserted into the key cylinder so the immobilizer will let it start. You will have to remove the key cylinder and the steering lock. If you are losing ignition when turning to start let us know, we will gladly instruct you to get your car running again.
Posted By: mgoetz74
Date Posted: July 06, 2018 at 4:22 PM
definitely have a immobilizer in that, don't forget there is also the steering wheel lock as well. I think those add on PTS you still have to put a key in the ignition and turn it on then push the PTS button.
-------------
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!
|