Clifford Intellistart 1 Installation Manual Needed

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145346
Printed Date: April 24, 2024 at 9:44 AM

Topic: Clifford Intellistart 1 Installation Manual Needed

Posted By: stargaizer
Subject: Clifford Intellistart 1 Installation Manual Needed
Date Posted: April 08, 2019 at 6:38 PM

Hi everyone,

I'm in need of an old school remote start add on module installation manual for the Clifford Intellistart 1, the first model. I attached a photo of the module below. If someone that has this please upload, I would greatly appreciate it.

Thanks,
Steve

posted_image

-------------
Stargajzer

Replies:

Posted By: tonanzith
Date Posted: April 13, 2019 at 10:05 PM

Should be this one. For some reason I couldn’t upload it here from my phone.

Clifford manual

-------------
Gary Sather

Posted By: stargaizer
Date Posted: April 13, 2019 at 11:13 PM

Hi Gary,

Yes, this is it. Thank you very much for uploading this installation manual, if there is anything I could do to help you in return please ask. I'll upload it to the installation manual section in case someone else may need it also.

Thank you,
Steve

-------------
Stargajzer

Posted By: stargaizer
Date Posted: May 04, 2019 at 10:42 PM

Hi Gary,

Would you happen to have the installation manual for the Clifford Intelliguard IQ 900 ? This is the alarm that I was looking to interface with the Intellistart module which you provided the installation manual for recently.

Thank you very much,
Steve

-------------
Stargajzer

Posted By: tonanzith
Date Posted: May 05, 2019 at 11:04 AM

Here you go.

Manual

-------------
Gary Sather

Posted By: stargaizer
Date Posted: May 06, 2019 at 11:53 AM

Thank you very much Gary!

-------------
Stargajzer

Posted By: stargaizer
Date Posted: August 03, 2019 at 12:06 AM

Hi Gary,

I was hoping that you would be kind enough to share your Clifford knowledge on something, I have a problem with my Intelligard 900IQ, I recently jump started another car a few weeks ago, since then every time I disarm the alarm and enter the car, the LED flashes the following sequence, 3, 4, 3, 1, 3, 3, 3, 3. Referencing the owner's manual these flashes indicate alarm triggers prior to the most recent disarming. I have a suspicion that I may have damaged one or more components on the alarm's printed circuit board, what are your thoughts?

Thanks!
-Steve

-------------
Stargajzer