2016 Scion iA Alarm/Remote Start Wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145525
Printed Date: May 01, 2025 at 7:07 AM
Topic: 2016 Scion iA Alarm/Remote Start Wiring
Posted By: muttnsnuff
Subject: 2016 Scion iA Alarm/Remote Start Wiring
Date Posted: July 18, 2019 at 6:21 PM
Looking for installation wiring diagrams to install remote start and alarm. Thank you
Replies:
Posted By: wirewise
Date Posted: July 18, 2019 at 6:38 PM
SCION IA
MODEL YEAR(S
IA 2016
KEY T-HARNESS IMMOBILIZER
N/A N/A VEHICLES WITH SMART KEY AND PUSH TO START REQUIRES A DBALL2 INTERFACE FOR REMOTE STARTING
PART COLOR LOCATION DIAGRAM
12 VOLT CONSTANT WHITE (+) camshaft position sensor, 4 pin plug, pin 1 or 2
STARTER GRAY (+) Start Stop Unit in steering column, white 24 pin plug, pin 23
STARTER 2 N/A
IGNITION 1 YELLOW (+) Start Stop Unit in steering column, white 24 pin plug, pin 10
IGNITION 2 N/A
IGNITION 3 N/A
ACCESSORY/HEATER BLOWER 1 PINK (+) Start Stop Unit in steering column, white 24 pin plug, pin 2
ACCESSORY/HEATER BLOWER 2 N/A
KEYSENSE N/A
PARKING LIGHTS ( - ) PINK (-) USE HAZARDS Start Stop Unit in steering column, white 32 pin plug, pin 4
PARKING LIGHTS ( + ) N/A
POWER LOCK PINK(-) THRU 1000 ohms (ONE WIRE SYSTEM) BCM above driver kick, white 32 pin plug, pin 6
POWER UNLOCK PINK (-) BCM above driver kick, white 32 pin plug, pin 6
LOCK MOTOR WIRE TAN (5-WIRE) ESU in driver kick, white 8 pin plug, pin 2
DOOR TRIGGER GREEN (-) BCM above driver kick, white 32 pin plug, pin 20
DOMELIGHT SUPERVISION RED (-) ESU in driver kick, white 18 pin plug, pin 16
TRUNK RELEASE GREEN (-) BCM above driv kick, white 24 pin plug, pin 11
SLIDING POWER DOOR N/A
HORN PINK (-) horn switch, white 14 pin plg, pin 1 or BCM, white 24 pin plug, pin 22
TACH BROWN (AC) camshaft position sensor, engine driver side, gray 3 pin plug, pin 1
WAIT TO START LIGHT N/A
BRAKE BLUE (+) Start Stop Unit in steering column, white 32 pin plug, pin 2
FACTORY ALARM DISARM BROWN (-) BCM above driver kick, white 32 pin plug, pin 22
ANTI-THEFT VEHICLES WITH SMART KEY AND PUSH TO START REQUIRES A DBALL2 INTERFACE FOR REMOTE STARTING
-------------
~wirewise~
Verify all wiring with your meter before making any connections!
Posted By: muttnsnuff
Date Posted: July 18, 2019 at 6:44 PM
Would a bd3 bypass work?
Posted By: muttnsnuff
Date Posted: July 18, 2019 at 7:34 PM
Need some picture instructions for installing remote start/alarm
|