Print Page | Close Window

2013 Scion xD, Remote Start Wiring

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145774
Printed Date: May 05, 2024 at 9:38 AM


Topic: 2013 Scion xD, Remote Start Wiring

Posted By: seattleweasel
Subject: 2013 Scion xD, Remote Start Wiring
Date Posted: November 12, 2019 at 11:15 AM

New user, came across this great little site. Looking for a wiring diagram to help me install a remote start/keyless ignition/keyless entry system. The vehicle does not user a transponder that I'm aware of. The mess of wires under the dash is devoid of any kind of indicator, and I'd rather not spend 3 days probing each tiny wire to find the one I'm looking for! Thanks in advance!

(Also if I missed something already out there, kindly kick me and point me in the right direction!)



Replies:

Posted By: wirewise
Date Posted: November 12, 2019 at 11:20 AM
2008 through 2014 are the same as what is listed here: https://www.the12volt.com/installbay/forum_posts.asp?tid=106665

-------------
~wirewise~ Verify all wiring with your meter before making any connections!




Posted By: wirewise
Date Posted: November 12, 2019 at 11:22 AM
Here's some more info:

SCION xD
MODEL      YEARS
xD      2008-2014
KEY      T-HARNESS      IMMOBILIZER
TOYKEY-2      N/A      MAY HAVE SCION'S TRANSPONDER ANTI-THEFT SYSTEM, SEE VEHICLE'S OWNER'S MANUAL See NOTE #1
PART      COLOR      LOCATION      DIAGRAM
12 VOLT CONSTANT      CONNECT TO BATTERY ONLY!           
STARTER      BLACK (+) (X2) Common wire!      @ IGNITION SWITCH, (WHITE, 8-PIN PLUG), PIN 7      
STARTER 2      N/A           
IGNITION 1      PINK (+)      @ IGNITION SWITCH, (WHITE, 8-PIN PLUG), PIN 6      
IGNITION 2      GREEN (+)      @ IGNITION SWITCH, (WHITE, 8-PIN PLUG), PIN 1      
IGNITION 3      N/A           
ACCESSORY/HEATER BLOWER 1      WHITE (+)      @ IGNITION SWITCH, (WHITE, 8-PIN PLUG), PIN 2      
ACCESSORY/HEATER BLOWER 2      N/A           
KEYSENSE      N/A           
PARKING LIGHTS ( - )      WHITE (-)      @ HEADLIGHT Switch, (WHITE, 13-PIN PLUG), PIN 13      
PARKING LIGHTS ( + )      GREEN (+)      @ DASH FUSE BOX, (WHITE, 30-PIN PLUG(A), PIN 29      
POWER LOCK      BROWN to LT. GREEN (-) TYPE B, NOTE #2      in DRIVERS KICK PANEL, (WHITE, 20-PIN PLUG), PIN 5      
POWER UNLOCK      TAN (-) TYPE B, NOTE #3      in DRIVERS KICK PANEL, (WHITE, 20-PIN PLUG), PIN 6      
LOCK MOTOR WIRE      LT. TAN to WHITE (5-Wire Type)      in DRIVERS KICK PANEL, (WHITE, 20-PIN PLUG), PIN 10      
DOOR TRIGGER      RED (-)      in DRIVERS KICK PANEL or DASH FUSE BOX, (WHITE, 20-PIN PLUG(A), PIN 21      
DOMELIGHT SUPERVISION      PINK (-)      @ DASH FUSE BOX, (WHITE, 6-PIN PLUG(K), PIN 2      
TRUNK RELEASE      YELLOW (-), NOTE #4      in DRIVERS KICK PANEL, Harness to REAR of Vehicle      
SLIDING POWER DOOR      N/A           
HORN      BLACK (-)      @ HORN SWITCH or DASH FUSE BOX, (WHITE, 32-PIN PLUG(E), PIN 18      
TACH      RED, YELLOW, PINK or BLUE (AC)      @ Any FUEL-INJECTOR      
WAIT TO START LIGHT      N/A           
BRAKE      GREEN to PURPLE (+)      @ BRAKE PEDAL SWITCH or DASH FUSE BOX, (WHITE, 30-PIN PLUG(A), PIN 12      
FACTORY ALARM DISARM      GREEN to YELLOW (-) Requires Double Pulse, NOTE #5      in DRIVERS KICK PANEL, (WHITE, 20-PIN PLUG), PIN 8      
ANTI-THEFT      SCION'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1      TRANSPONDER @ IGNITION SWITCH TUMBLER      
NOTES
NOTE #1: TOYOTA'S TRANSPONDER SYSTEM, Requires Bypass Module:
(For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation.
(For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for Operation) 2-KEYS Required to Program Module.
(For Remote Starting/Door Locks) Part # DBALL2 (No Extra Key Required for Operation) 1-KEY Required for Programming.

NOTE #2: this wire is only needed if the Door Locks do not function with the Aftermarket System while the vehicle is running. All other times just use the Factory Alarm Arm wire.

NOTE #3: this wire is only needed if the Door Locks do not function with the Aftermarket System while the vehicle is running. All other times just use the Factory Alarm Disarm wire.

NOTE #4: TEST this wire while Opening the Hatch with the Handle on the REAR of the Vehicle.

NOTE #5: TEST this wire while turning the Key in the Drivers Door, this wire will also Unlock the doors.

-------------
~wirewise~ Verify all wiring with your meter before making any connections!




Posted By: seattleweasel
Date Posted: November 12, 2019 at 12:30 PM
That's amazing! I'll take a look and post back with my certain success!





Print Page | Close Window