2015 Nissan Rogue, Bose Amp Wiring

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145903
Printed Date: July 13, 2025 at 5:07 AM

Topic: 2015 Nissan Rogue, Bose Amp Wiring

Posted By: jsigna
Subject: 2015 Nissan Rogue, Bose Amp Wiring
Date Posted: January 02, 2020 at 9:53 AM

Happy New Years all!

I am going to install an Alpine Equalizer / DSP system along with an Kenwood amplifier in a week for my uncle.

This will be replacing his factory Bose amplifier and retaining his factory radio.

I am looking for the wiring of the Radio > Amplifier (amp input). The provided document on this page had a lot of good info, including amp output wiring for the speakers.

For the Bose system, there is no clear wiring for the input wires.

Can any of you guys help me out?

Thanks in advanced!!

-Justin

Replies:

Posted By: geepherder
Date Posted: January 02, 2020 at 12:00 PM

Create a free account here:

https://www.bbbind.com/tsb-and-wiring-diagrams-login/

Select your vehicle, Interior & Driver Amenity, Navigation:

https://www.bbbind.com/tsb-wiring-diagrams-database-results/?type=WD&years=2015&make=65&makeDesc=Nissan&model=3398&modelDesc=Rogue&system=7&systemDesc=Interior%20&%20Driver%20Amenity&docid=8209985

-------------
My ex once told me I have a perfect face for radio.

Posted By: jsigna
Date Posted: January 02, 2020 at 12:29 PM

This is EXACTLY what I want.

Wow. Thanks!

I signed up and have not received an confirmation email yet. However your link worked.

1 more question. When I disconnect the factory amp, do you think there is a chance that the factory microphone / could be affected. I want to get logged into BBBI asap to look at the other plug on the amp to see if any of these wires need to be connected besides the speakers.

Posted By: geepherder
Date Posted: January 02, 2020 at 8:05 PM

Someone correct me if I'm wrong, but if you replace the factory amp with an aftermarket, you lose use of the factory mic.

I don't think there's either a PAC AmpPro or an idatalink Maestro for the Rogue, so your options are likely limited.

You could get signal after the factory amp, which would add complexity, since you're dealing with 8 channels out (plus sub) instead of 4 channels in.

-------------
My ex once told me I have a perfect face for radio.

Posted By: jsigna
Date Posted: January 05, 2020 at 2:55 PM

Oh no.. That is an absolute show stopper for me.

Could you send me the link for the other plug on the amp? You sent the output side (output for the most part).

Could you send me the link for the input side? I cannot create an account for some reason. They never email me.

I would have assumed the factory mic plugs into the radio. Confused as to the purpose of the amp being involved.

Posted By: jsigna
Date Posted: January 05, 2020 at 3:29 PM

MI just unplugged both amp plugs, speakers obviously did not work, but Mic worked!