Alpine PXA-H800, 2015 Nissan Rogue, Input for Subwoofers
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145928
Printed Date: May 05, 2024 at 5:25 AM
Topic: Alpine PXA-H800, 2015 Nissan Rogue, Input for Subwoofers
Posted By: jsigna
Subject: Alpine PXA-H800, 2015 Nissan Rogue, Input for Subwoofers
Date Posted: January 08, 2020 at 10:03 AM
Hey all.
I am going to be adding an Alpine PXA-H800 DSP along with a Kenwood 4 channel and Sub amp.
I will be retaining the factory radio and no longer using the factory bose amp in a 2015 Nissan Rogue.
Right now the radio output's 4 channel's (plus the center channel). There is no sub output as the factory amplifier must have took the rear signal and split the output to the factory sub-woofers.
I am wondering how to get the input for the subs. Can the PXA-H800 take 4 channels in and output 6 channels? (2 for the sub)?
If that is not possible, is it silly to use the center channel output from the radio to feed channel 5 and 6 on the PXA-H800 for sub output?
How would you guys go about a situation like this?
Thanks!
Justin
Replies:
Posted By: jsigna
Date Posted: January 08, 2020 at 12:26 PM
It appears I can input 4 channels and output 5.
Unit is filled with features. Hope this goes well.
|