Viper 3305V, 1995 Nissan Hardbody, Starter Interrupt Relay
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146027
Printed Date: May 06, 2024 at 11:35 PM
Topic: Viper 3305V, 1995 Nissan Hardbody, Starter Interrupt Relay
Posted By: shooky
Subject: Viper 3305V, 1995 Nissan Hardbody, Starter Interrupt Relay
Date Posted: February 16, 2020 at 8:45 PM
Just finished up installing a Viper 3305V on my sons 1995 Nissan hardbody. Everything is working properly but my question has to do with the starter interrupt relay. There’s a black wire and a teal looking wire coming off of a relay that is feed by the orange (-) 500mA GWA output and the yellow ignition wire, which also jumps another yellow wire out to wire to the ignition. The install manual doesn’t mention the relay as part of the kit, but it’s pre-wired into the harness. I haven’t wired it in to anything yet and really don’t have to, but would really like to complete the install. Any help would be greatly appreciated.
Replies:
Posted By: i am an idiot
Date Posted: February 17, 2020 at 7:16 AM
You have to cut the start wire of the vehicle. Connect the key side of that wire to the wire that is jumped over to a second terminal of the relay. Connect the starter side of that wire to the not orange wire. Orange wire will go to the Ground While Armed wire of the alarm system.
|