2016 Kia w/Harman Kardon, Full Range Signal?
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146312
Printed Date: April 25, 2024 at 4:07 AM
Topic: 2016 Kia w/Harman Kardon, Full Range Signal?
Posted By: audioneder
Subject: 2016 Kia w/Harman Kardon, Full Range Signal?
Date Posted: July 05, 2020 at 10:45 AM
Which 2 factory speakers can I tap into at the factory HK amp (in trunk) to get a full range signal to my Audiocontrol lc2i?
Replies:
Posted By: mgoetz74
Date Posted: July 05, 2020 at 11:51 AM
2016 kia...?... with hk amp
-------------
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!
Posted By: i am an idiot
Date Posted: July 05, 2020 at 7:43 PM
Chances are there is not a full range output on any channel of the amplifier. But just to make sure, as asked above, what model is the Kia?
Posted By: audioneder
Date Posted: July 05, 2020 at 8:05 PM
It's a 2016 Optima SX Turbo. I beleive it shares this system with the SXL which has top tier options but an old man interior I couldn't get past😄
Posted By: i am an idiot
Date Posted: July 05, 2020 at 8:40 PM
There is not a full range channel on that vehicle. As far as I can see it is a Tri-amplified system.
Posted By: mgoetz74
Date Posted: July 06, 2020 at 3:06 PM
should be able to do the rear door speakes.... LR door black- pin 26 and white+ pin 13 RR white- pin 25 brown+ pin 12. I wouldn't use fronts since those are mid range or the surround speaker
-------------
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!
Posted By: i am an idiot
Date Posted: July 06, 2020 at 4:50 PM
Radio 12V Red or Red/Black + Radio, white 24 pin plug, pin 12
Radio Ground Black - Radio, white 24 pin plug, pin 24
Radio Ignition Blue + Radio, white 24 pin plug, pin 11 or 18
Radio Illumination Red (parking lights); Brown (dimmer) +,- Radio, white 18 pin plug, pin 8 (parking lights); pin 17 (dimmer)
Factory Amp Turn-on (M-CAN)
Power Antenna Red/Orange + Radio, white 18 pin plug, pin 18
Left Front Speaker (+/-) Red - Blue (woofer); Green - Orange (midrange) +,- Radio, white 18 pin plug, pins 2 - 11
Right Front Speaker (+/-) Green - Orange (woofer); Green - Orange (midrange) +,- Radio, white 18 pin plug, pins 3 - 12
Left Rear Speaker (+/-) White - Black +,- Radio, white 18 pin plug, pins 1 - 10
Right Rear Speaker (+/-) Brown - White +,- Radio, white 18 pin plug, pins 4 - 13
Left Front Speaker - With Amp Red - Blue (woofer); Green - Orange (midrange) +,- Amplifier in trunk right side, white 28 pin plug (B), pins 4 - 19 (woofer); white 28 pin plug (A), pins 13 - 26 (midrange)
Right Front Speaker - With Amp Green - Orange (woofer); White - Brown (midrange) +,- Amplifier in trunk right side, white 28 pin plug (B), pins 3 - 18 (woofer); white 28 pin plug (A), pins 12 - 25 (midrange)
Left Rear Speaker - With Amp White - Black (woofer); Red/Orange - White/Orange (midrange) +,- Amplifier in trunk right side, white 28 pin plug (B), pins 13 - 26 (woofer); pins 15 - 28 (midrange)
Right Rear Speaker - With Amp Brown - White (woofer); Green - Orange (midrange) +,- Amplifier in trunk right side, white 28 pin plug (B), pins 12 - 25 (woofer); pins 14 - 27 (midrange)
Center Channel - With Amp Yellow - Black +,- Amplifier in trunk right side, white 28 pin plug (A), pins 14 - 27
Subwoofer - With Amp Blue - Red (coil 1); White - Brown (coil 2) +,- Amplifier in trunk right side, white 28 pin plug (B), pins 2 - 17 (coil 1); pins 1 - 16 (coil 2)
Posted By: audioneder
Date Posted: July 26, 2020 at 4:25 PM
I found a photo of the speaker descriptions, and am wondering if I can capture the whole bandwidth with a 4ch Dsp input, or if I need six channels of input?
|